+- Hack Forums (https://hackforums.net)
+-- Forum: Tech (https://hackforums.net/forumdisplay.php?fid=444)
+--- Forum: Coding (https://hackforums.net/forumdisplay.php?fid=151)
+---- Forum: Software Development (https://hackforums.net/forumdisplay.php?fid=118)
+---- Thread: [Shell] CMD Help (/showthread.php?tid=4191953)
CMD Help - Trojans - Apr 24, 2014
Hey, so a couple months ago I changed the 'utilman' setting to the CMD. Incase you don't know what 'utilman' is, it's the help button that appears on windows login screens (bottom left), I did this so just in case I could change my password to my PC. But here's where I need help.
I can't access CMD on my desktop anymore, well I can't run any
codes, I get an error stating.
"DNS Server Not Autorized For Zone".
Seems like a simple fix, but have yet to figure it out.
Any help would be great.
Thanks.
* - ɩᴄᴀʀᴜȿ ᴌוᴠᴇѕ™ - Apr 24, 2014
Copy&Pasta from this http://technet.microsoft.com/en-us/library/cc780197(v=ws.10).aspx
Specify DNS servers as authoritative for a zone
1 out of 11 rated this helpful - Rate this topic
Applies To: Windows Server 2003, Windows Server 2003 R2, Windows Server 2003 with SP1, Windows Server 2003 with SP2
Domain Name System (DNS) servers that you specify with the following procedure are added to those server Internet Protocol (IP) addresses that are already present for the existing name server (NS) resource record for the zone. Typically, you might only need to perform this procedure at the primary zone when you add DNS servers to act as secondary servers and also to specify that these servers are known to be authoritative when they answer queries for zone data.
DNS servers automatically add and perform initial configuration of the NS resource record for each new primary zone that is added to the server.
You can perform this procedure by using the DNS snap-in or by using the Dnscmd command-line tool.
Administrative credentials
To perform this procedure, you must be a member of the Administrators group on the local computer, or you must have been delegated the appropriate authority. If the computer is joined to a domain, members of the Domain Admins group might be able to perform this procedure. As a security best practice, consider using the Run as command to perform this procedure.
Specifying DNS servers as authoritative for a zone
Using the Windows interface
Using the command line
To specify DNS servers as authoritative for a zone using the Windows interface
Open the DNS snap-in.
In the console tree, right-click the applicable zone, and then click Properties.
Click the Name Servers tab.
Click Add.
Specify additional DNS servers by their names and IP addresses, and then click Add to add them to the list.
noteNote
To open the DNS snap-in, click Start, point to Administrative Tools, and then click DNS.
noteNote
To add a name server to the list of authoritative servers for the zone, you must specify both the server's IP address and its DNS name. When you enter a name, click Resolve to resolve the name to its IP address before adding it to the list.
To specify DNS servers as authoritative for a zone using the command line
At a command prompt, type the following command, and then press ENTER:
dnscmd ServerName /RecordAdd ZoneNameNodeName [/Aging] [/OpenAcl] [Ttl] NS {HostName|DomainName}
Value Description
ServerName
Required. Specifies the DNS host name of the DNS server. You can also type the IP address of the DNS server. To specify the DNS server on the local computer, you can also type a period (.)
/RecordAdd
Required. Specifies the command to add a resource record.
ZoneName
Required. Specifies the fully qualified domain name (FQDN) of the zone.
NodeName
Required. Specifies the FQDN of the node in the DNS namespace for which the SOA record is added. You can also type the node name relative to the ZoneName or @, which specifies the zone's root node.
/Aging
If this command is used, this resource record is able to be aged and scavenged. If this command is not used, the resource record remains in the DNS database unless it is updated or removed manually.
/OpenAcl
Specifies that new records are open to modification by any user. Without this parameter, only administrators may modify the new record.
Ttl
Specifies the Time to Live (TTL) setting for the resource record. (The default TTL is defined in the start-of-authority (SOA) resource record).
NS
Required. Specifies that you are adding a name server (NS) resource record to the zone that is specified in ZoneName.
HostName|DomainName
Required. Specifies the host name or FQDN of the new authoritative server.
* - BlacksmithSec - Apr 25, 2014
if when you try to run cmd you get error from DNS then your cmd.exe is malware and you should consider your computer compromised and reinstall ur os