Pokemon Go >>FREE GUIDE<< How To Run Unlimited NecroBot's Via Proxy >>FREE GUIDE<<

[Pokemon Go] >>FREE GUIDE<< How To Run Unlimited NecroBot's Via Proxy >>FREE GUIDE<< - Printable Version

+- Hack Forums (https://hackforums.net)
+-- Forum: General Topics (https://hackforums.net/forumdisplay.php?fid=7)
+--- Forum: Entertainment (https://hackforums.net/forumdisplay.php?fid=446)
+---- Forum: Gaming (https://hackforums.net/forumdisplay.php?fid=65)
+---- Thread: [Pokemon Go] >>FREE GUIDE<< How To Run Unlimited NecroBot's Via Proxy >>FREE GUIDE<< (/showthread.php?tid=5371554)

Pages: Pages 1 2

>>FREE GUIDE<< How To Run Unlimited NecroBot's Via Proxy >>FREE GUIDE<< - Mephaela - Aug 11, 2016

Hey Guys! There has been a lot of people asking if it's possible to run multiple instances of Necro bot, yes, it's possible, however you must proxy each individual account, which is a bit of a pain to first start, but VERY worth it in the end. NecroBot's Proxy system DOES NOT work, so do not use it, to succesfully proxy your accounts, you will be using a program called Proxifier.

Here's what you do!

First off, if you don't already have Necrobot, here's the download link: NecroBot Release

Next, if you don't have Proxifier already (Which I highly recommend having anyway) Download it here: Proxifier

Next, you will need Proxies! I personall use Blazing Proxies, they have been fantastic so far, and they have a PokemonGo section for dedicated proxies specifically for PokemonGo. If you have any proxy problems, such as an IP getting blacklisted, they will exchange your proxy for a new and working one within minutes, they are also super cheap, highly recommend them here's their direct link: Blazing Proxies

Now that you have everything you need to start Proxying your accounts, you need to make sure your set up is correct, first off you will have to go into your Necrobot Config, find Auth.Json, and open it with notepad:

[Image: 0d189bcf33.png]

Edit the type of login, the username, and the password, as well as the proxy settings, when you're done they should look like this:

[Image: d0491806c9.png]

Now that you have your Auth.Json settings figured out, you will want to copy your original NecroBot folder as many times as you have accounts to proxy, for this example I have 7 accounts proxied, so my set up looks likethis:

[Image: 9e305e5d33.png]

Once your folders are set up, you will have to re name each individual NecroBot.exe so they are Unique, example, NecroBot1.exe, NecroBot2.exe, Necrobot3.exe, etc etc etc. THIS IS VITAL OR YOUR PROXIES WILL NOT WORK.

Ok, each bot is now ready to be proxied... Open up Proxifier, and in the top left, go to Profile > Proxy Servers, click on "Add". You will get a screen that looks like this:

[Image: 432650a7c6.png]

Fill in the appropriate settings, make sure the final result looks like this (Obviously with your own information filled in):

[Image: 8145c44cc8.png]

And then Press ok, this will add your specific Proxy to the list.

The next step is to change your proxification rules, you're almost done! Go to profile again, and this time go to Proxification rules. Just like before, click on "Add" and you will get a window that looks like this:

[Image: 171272134e.png]

To find the path, press browse, and find your first NecroBot.exe that you want to add to the proxy and add it to the Applications list, and finally at the bottom of the window, select the dropdown box that says "Action" And choose the the proxy you would like to connect with on the account, the final result should look like this (Obviously with your own settings):

[Image: b45e0c1bf3.png]

Now that you have your NecroBot added to the list, simply start it like you would any other time, and it will automatically connect you through the Proxy and run it like normal, repeat these steps as many times as you'd like to add a new bot on a proxy. Here is the result:

[Image: 3797f50a2c.png]

I hope this guide helped you out! If you have any questions or trouble, or just want to learn more, hit me up! Will gladly chat if I have the time, also please check out my E-Book I have for helping out with setting up bots to be more efficient, + help with configs etc.

Good luck Botting!!

* - PotatoBlood - Aug 11, 2016

(Aug 11, 2016 02:13 PM)Daehdra Wrote: NecroBot's Proxy system DOES NOT work, so do not use it, to succesfully proxy your accounts, you will be using a program called Proxifier.

It does work for me 😵

nice guide for those who can't get it to work though

* - Mephaela - Aug 11, 2016

(Aug 11, 2016 02:18 PM)PotatoBlood Wrote: It does work for me 😵

nice guide for those who can't get it to work though

Really? Mine stopped working a few days ago, it was just logging in via my own IP even when I had a proxy entered so I had to find another method, whatever works though!

* - damndoe - Aug 11, 2016

does that work with socks?

* - BTCExchangez - Aug 11, 2016

Saving this thread for later, nicely written.

* - Mephaela - Aug 11, 2016

(Aug 11, 2016 02:48 PM)damndoe Wrote: does that work with socks?

I don't believe so, but I haven't looked into it yet! If I do I will update this thread :)

I'm glad you're all finding this helpful!

* - Tor - Aug 11, 2016

Great tutorial, keep it up!

* - SpecterCraze - Aug 11, 2016

will try this and let you know. now i just need a good set of public proxy for testing purpose

* - SIM-403479 - Aug 11, 2016

Nice share OP. Hopefully get less of them threads now

* - DoxM3 - Aug 11, 2016

Awesome thread :) keep up the good work bro

* - CapsBruh - Aug 11, 2016

I will now try to setup 4 Necro's with my dedicated proxies from blazinseollc.

I'll report back how it goes. I have had troubles trying to run haxton and necro at the same time in any situation.

* - 'Ben - Aug 11, 2016

Necrobot proxy support works perfectly

* - Mephaela - Aug 11, 2016

(Aug 11, 2016 03:48 PM)Ben Wrote: Necrobot proxy support works perfectly

Have heard differen't results from people, some say it works, some say it doesn't... Proxifier is 100% as of right now

* - 'Ben - Aug 11, 2016

(Aug 11, 2016 03:52 PM)Daehdra Wrote: Have heard differen't results from people, some say it works, some say it doesn't... Proxifier is 100% as of right now

It's probabably down to user error if it doesn't work and I think I know why.
A lot of the configs don't come with the quotations in place (" ") instead it just says null,

Need to make sure both the IP & port are in quotations or it won't work

Anyway, whatever is easier for the user. This looks simple enough to use, will make things quicker as well

* - Omarion - Aug 11, 2016

(Aug 11, 2016 03:55 PM)Ben Wrote: It's probabably down to user error if it doesn't work and I think I know why.
A lot of the configs don't come with the quotations in place (" ") instead it just says null,

Need to make sure both the IP & port are in quotations or it won't work

Anyway, whatever is easier for the user. This looks simple enough to use, will make things quicker as well

100% correct, user error is likely because people have been consistently running 50+ proxies without flaws.