+- Hack Forums (https://hackforums.net)
+-- Forum: Hacks, Exploits, and Various Discussions (https://hackforums.net/forumdisplay.php?fid=45)
+--- Forum: Grayhat • Purple Team • Hybrid Security (https://hackforums.net/forumdisplay.php?fid=449)
+---- Forum: Beginner Hacking (https://hackforums.net/forumdisplay.php?fid=4)
+----- Forum: Hacking Tutorials (https://hackforums.net/forumdisplay.php?fid=47)
+----- Thread: == SECRECY == >>>How to setup Imminent Monitor <<< (/showthread.php?tid=5676519)
== SECRECY == >>>How to setup Imminent Monitor <<< - SysAdmin - Jul 23, 2017
![[Image: 2HKf63B.png]](https://i.imgur.com/2HKf63B.png)
Introduction
As Pronouncer already did an interesting setting up guide for Orcus, i'll be doing the same for Imminent Monitor. This guide will be setting up Imminent Monitor for home (Legit) usage.
NOTE: Pictures in the thread are NOT resized!
Step 1 - Friendly GUI!
We will start at the News tab of the Remote Administration Tool. This is the GUI you will be faced with once starting up (and logging into) Imminent Monitor.
Spoiler (Click to View)
![[Image: MRIpZdh6QnOs4On4zl99JQ.png]](https://image.prntscr.com/image/MRIpZdh6QnOs4On4zl99JQ.png)
Step 2 - Building the Stub
What we're looking for is the "Client Builder" button that is located on the bottom left of the GUI, next to "Logout" and "Settings"
Spoiler (Click to View)
![[Image: 6JFX1ppRRZ6TxhpV_ta7kg.png]](https://image.prntscr.com/image/6JFX1ppRRZ6TxhpV_ta7kg.png)
When you click this, you are taken to the Client Builder page which includes Identification, Network Settings, Module Protection, Client Startup and Assembly Information.
Spoiler (Click to View)
![[Image: 7MtPo04nQo6FVdIstAMbKA.png]](https://image.prntscr.com/image/7MtPo04nQo6FVdIstAMbKA.png)
Step 3 - Configuring the Stub
Identification is a required setting, it allows you to set your company name or your name, your contact email and an invisible client mode. You can put in anything you want here.
Spoiler (Click to View)
![[Image: z3jL8s0AQLWVuDsiZMQvLQ.png]](https://image.prntscr.com/image/z3jL8s0AQLWVuDsiZMQvLQ.png)
Network Settings are an essential part of the build, it tells the stub where to connect when ran. Since we're going to use our local network, we take our IPv4 local address (Looks like 192.168.x.x) and put it in the IP/DNS Field. You can use ANY Port as long as your settings are set up to listening onto that very port. Imminent Monitor uses 6688 as it's default listening port.
In our case, we do not need to portforward, as the client will connect via a Local Network.
Client Group is the name of the group of which the client is in, in my case, i named it LocalNetwork, you can name it whatever you want.
Module Protection is often used for various helpful settings. We'll be using "Ensure Client Remains on Startup", since we want to keep the stub alive even after the PC Restarts.
Spoiler (Click to View)
![[Image: ifdi_ZdXRG_XaXbtNr3fBQ.png]](https://image.prntscr.com/image/ifdi_ZdXRG_XaXbtNr3fBQ.png)
Assembly Information is how the stub will look like when built. You can use your own information here and a custom icon.
Spoiler (Click to View)
![[Image: HR1FWJMgR9aLlGvxHKpn2Q.png]](https://image.prntscr.com/image/HR1FWJMgR9aLlGvxHKpn2Q.png)
REMEMBER TO ALWAYS READ THE TERMS OF USE BEFORE AGREEING!
Spoiler (Click to View)
![[Image: 9tEoGbXETnGbAIfJBDZHjg.png]](https://image.prntscr.com/image/9tEoGbXETnGbAIfJBDZHjg.png)
If you're going to use the settings often, you can save the settings by clicking on the "Save Settings" button.
If not, just click on "Compile"
Spoiler (Click to View)
![[Image: wYipDk0LTAmiw5H9KZs6QA.png]](https://image.prntscr.com/image/wYipDk0LTAmiw5H9KZs6QA.png)
Step 4 - Execution
All you have to do now is to run the stub on the system you want to monitor.
This will pop-up, make sure you are listening to the port you set in the Client Builder and click "Connect"
Spoiler (Click to View)
![[Image: FOPgFah4QTeKkhGweWnxPA.png]](https://image.prntscr.com/image/FOPgFah4QTeKkhGweWnxPA.png)
And that's it, you can now monitor the computer you executed the stub on!
Step 5 - Final Words
I'd like to say that i'm in no way a Ratting Expert, I have used Imminent Monitor a few years ago, but still have memory on how it works. If you see anything wrong with what i've typed out, please PM me and I will fix it.
Thank you for taking the time to read this thread. We appreciate your effort and look forward to helping you out. If you are interested in joining us please read this thread.
https://hackforums.net/showthread.php?tid=5673489
https://hackforums.net/showthread.php?tid=5673489
* - Pronouncer - Jul 23, 2017
This is an approved Secrecy thread
* - PixlFX - Jul 23, 2017
Thanks for helping newbies! Big help for everyone else.
* - Pronouncer - Jul 25, 2017
Still a very valid read by secrecy
* - kubix32 - Sep 1, 2017
You help me! Thanks man. Nice tut.
* - SIM-3616989 - Sep 4, 2017
I am facing problem with my files
I am facing problem with my files after crypting and uploading my files in a link it is immediately being corrupted it is automatically showing warning signs to me before opening the file, is there anyone with the same experience who please guide me.
Thanks
* - SysAdmin - Sep 4, 2017
(Sep 4, 2017 12:22 AM)DEVINE FAVOUR Wrote: I am facing problem with my files
I am facing problem with my files after crypting and uploading my files in a link it is immediately being corrupted it is automatically showing warning signs to me before opening the file, is there anyone with the same experience who please guide me.
Thanks
Might be that your crypter is outdated and is being detected.
* - DeLiiRiuM - Sep 4, 2017
Ayee, I'm ready to start being active again. How about you?
* - SIM-3616989 - Sep 11, 2017
Ok Thanks alot for the answer i will check that right now
* - sasatefa2009 - Sep 14, 2017
can i disable the last message that requesting access to monitor the device ?
* - SysAdmin - Sep 14, 2017
(Sep 14, 2017 09:19 AM)sasatefa2009 Wrote: can i disable the last message that requesting access to monitor the device ?
Yes, I believe the "Stealth" option disables that. I'm not entirely sure.
* - SIM-3616989 - Sep 14, 2017
Hello can someone help me with the website where i can buy a good rats that is working with cyber seal crypter
i am using imminent monitor but since 4 days now it is not working properly and i have complained to them and uptill now there is no any response from them
* - SysAdmin - Sep 15, 2017
(Sep 14, 2017 11:42 PM)DEVINE FAVOUR Wrote: Hello can someone help me with the website where i can buy a good rats that is working with cyber seal crypter
i am using imminent monitor but since 4 days now it is not working properly and i have complained to them and uptill now there is no any response from them
I've been using Imminent Monitor for years now and I haven't had a single problem with it.
* - SIM-3616989 - Sep 19, 2017
Imminent Monitor no longer working or what is happening Files no longer installing directly without uc warning any person with the same experience? and thanks in advance