+- Hack Forums (https://hackforums.net)
+-- Forum: Tech (https://hackforums.net/forumdisplay.php?fid=444)
+--- Forum: Coding (https://hackforums.net/forumdisplay.php?fid=151)
+---- Forum: Software Development (https://hackforums.net/forumdisplay.php?fid=118)
+---- Thread: [C] [Solved] invalid types for subscript array (/showthread.php?tid=5780573)
[Solved] invalid types for subscript array - datguy.dev - Jan 6, 2018
Greetings,
I'm pretty bad at AVR C and was curious if anyone could help me with this?
I'm using the Teensy Keyboard library to try and automate BIOS configuration. I have no idea what data type KEY_F2 is for example and how that should be handled. I can't seem to find any references besides basic usages of the library.
Long error desc: https://pastebin.com/pqPrDF80
PHP Code
<?php
const int ledPin = 13;
const byte hp_bios_key = KEY_F10;
const byte dell_bios_key = KEY_F2;
const byte lenovo_bios_key = KEY_F1;
const byte hp_dell_netboot_key = KEY_F12;
const byte lenovo_netboot_key = KEY_F3;
void setup() {
pinMode(ledPin, OUTPUT);
for (int i=0; i < 10; i++) {
digitalWrite(ledPin, HIGH);
delay(100);
digitalWrite(ledPin, LOW);
delay(100);
}
//Keyboard.press(KEY_RIGHT);
//delay(250);
//Keyboard.release(KEY_RIGHT);
}
void Execute(byte keys, int repeats, int delays, int lens){
byte key_to_press;
int key_repeat;
int key_delay;
for (int s = 0; s < lens; s++) {
key_to_press = keys[s];
key_repeat = repeats[s];
key_delay = delays[s];
for (r = 0; r < key_repeats; r++) {
Keyboard.press(key_to_press);
delay(key_delay);
Keyboard.release(key_to_press);
delay(key_delay / 2);
}
}
}
void HP(byte process) {
if (process == 1) {
byte _keys[4] = [ KEY_TAB, KEY_ENTER, KEY_ESC, KEY_ENTER, ];
int _repeat[4] = [ 2, 4, 1, 9, ];
int _delay[4] = [ 300, 500, 300, 200, ];
Execute(_keys, _repeat, _delay, 4);
} else if (process == 2) {
//Execute(bios_sequence, seq_len);
}
}
void loop() {
// Do nothing after the test
}
I think I figured it out. The key variables can be ints. Now I can go back to multidimensional arrays. Sorry.
PHP Code
<?php
const int ledPin = 13;
const int hp_bios_key = KEY_F10;
const int dell_bios_key = KEY_F2;
const int lenovo_bios_key = KEY_F1;
const int hp_dell_netboot_key = KEY_F12;
const int lenovo_netboot_key = KEY_F3;
void setup() {
pinMode(ledPin, OUTPUT);
for (int i=0; i < 10; i++) {
digitalWrite(ledPin, HIGH);
delay(100);
digitalWrite(ledPin, LOW);
delay(100);
}
//Keyboard.press(KEY_RIGHT);
//delay(250);
//Keyboard.release(KEY_RIGHT);
}
void Execute(int keys[], int repeats[], int delays[], int lens){
int key_to_press;
int key_repeat;
int key_delay;
for (int s = 0; s < lens; s++) {
key_to_press = keys[s];
key_repeat = repeats[s];
key_delay = delays[s];
for (int r = 0; r < key_repeat; r++) {
Keyboard.press(key_to_press);
delay(key_delay);
Keyboard.release(key_to_press);
delay(key_delay / 2);
}
}
}
void HP(byte process) {
if (process == 1) {
int _keys[4] = { KEY_TAB, KEY_ENTER, KEY_ESC, KEY_ENTER, };
int _repeat[4] = { 2, 4, 1, 9, };
int _delay[4] = { 300, 500, 300, 200, };
Execute(_keys, _repeat, _delay, 4);
} else if (process == 2) {
//Execute(bios_sequence, seq_len);
}
}
void loop() {
// Do nothing after the test
}