+- Hack Forums (https://hackforums.net)
+-- Forum: Hacks, Exploits, and Various Discussions (https://hackforums.net/forumdisplay.php?fid=45)
+--- Forum: Blackhat • Red Team • Offensive Security (https://hackforums.net/forumdisplay.php?fid=447)
+---- Forum: Remote Administration Tools (https://hackforums.net/forumdisplay.php?fid=114)
+---- Thread: RAT only working on my own PC (nanocore) (/showthread.php?tid=6074151)
RAT only working on my own PC (nanocore) - AshBait - May 3, 2020
Hi,
I recently got Nanocore to start scambaiting, when i run the file on my own pc it work fine and it shows up on the client section in nanocore. However, when I run the file on my Virtual Machine or a different laptop, after opening the file, clicking yes and all, the VM or laptop doesnt show up on the client page?
Can anyone help?
Thanks,
Ash
RE: RAT only working on my own PC (nanocore) - shitmaster - May 3, 2020
Try to see if your firewall is blocking your ports. Also are your ports open in the first place? Most of the time when I see this issue, it's usually because of ports, firewall or DNS.
If the issue was the server, it wouldn't have ran on your own machine.
RE: RAT only working on my own PC (nanocore) - VisualSoft - May 3, 2020
I Agree with shitmaster, check out your port first.
RE: RAT only working on my own PC (nanocore) - SIM-888979 - May 3, 2020
Most likely you're not portforwarded. Also, I remember if you're testing on the same network, there might be some issue.
RE: RAT only working on my own PC (nanocore) - Accord - May 3, 2020
What is your configuration?? maybe you setup it for local use only?
RE: RAT only working on my own PC (nanocore) - VisualSoft - May 3, 2020
(May 3, 2020 06:17 AM)Lotus Wrote: Most likely you're not portforwarded. Also, I remember if you're testing on the same network, there might be some issue.
Naaa, Same network does not make any difference.
RE: RAT only working on my own PC (nanocore) - JohnDoe.1337 - May 3, 2020
You can test open ports on your Client here:https://www.canyouseeme.org/
RE: RAT only working on my own PC (nanocore) - Fire_Star - May 4, 2020
I think i soled your Problem OP.
RE: RAT only working on my own PC (nanocore) - QRCode - May 4, 2020
How you solved it?
Have the same problem when testing on myself that work but not on my VM.
Quasar work, but not Async
PS: Port OPEN (UDP / TCP) / TESTING WITH DNS & WITHOUT DNS
Quasar work fine but the password recovery is shit..
RE: RAT only working on my own PC (nanocore) - AMGTech - May 4, 2020
(May 4, 2020 12:31 PM)QRCode Wrote: How you solved it?send me a message and i will come help you :)
Have the same problem when testing on myself that work but not on my VM.
Quasar work, but not Async
PS: Port OPEN (UDP / TCP) / TESTING WITH DNS & WITHOUT DNS
Quasar work fine but the password recovery is Clay Davis..
RE: RAT only working on my own PC (nanocore) - QRCode - May 4, 2020
(May 4, 2020 12:40 PM)AMGTech Wrote: send me a message and i will come help you :)
This guys helpep me, was the mutex who make the problem :)
RE: RAT only working on my own PC (nanocore) - AMGTech - May 4, 2020
(May 4, 2020 01:17 PM)QRCode Wrote: This guys helpep me, was the mutex who make the problem :)you're welcome, good luck!
if anyone else needs any help just send me a message :)
RE: RAT only working on my own PC (nanocore) - amyweiser - May 4, 2020
Lol nanocore is dead and doesn’t work anymore. Only those with the original cracked version can use it. I advice you to check for another RAT.
RE: RAT only working on my own PC (nanocore) - SIM-4199941 - May 5, 2020
(May 3, 2020 04:33 AM)AshBait Wrote: Hi,
I recently got Nanocore to start scambaiting, when i run the file on my own pc it work fine and it shows up on the client section in nanocore. However, when I run the file on my Virtual Machine or a different laptop, after opening the file, clicking yes and all, the VM or laptop doesnt show up on the client page?
Can anyone help?
Thanks,
Ash
Hello,
This can happen for 2 reasons:
-Antivirus detect and delete your malware
-You don't open correctly your port
Use a no-log VPN (or build yourself), use a VPS if you can, and please remember to open your port and to use your ext. ip!