+- Hack Forums (https://hackforums.net)
+-- Forum: Tech (https://hackforums.net/forumdisplay.php?fid=444)
+--- Forum: Computing (https://hackforums.net/forumdisplay.php?fid=88)
+---- Forum: Computer Hardware (https://hackforums.net/forumdisplay.php?fid=87)
+---- Thread: Pc wont boot with RTX 3060 (/showthread.php?tid=6286686)
Pc wont boot with RTX 3060 - Skidsuper - Dec 16, 2024
I am using a cheiftec 750C powersupply which should have more then enough power. When I swap with my older amd gpu it runs ok. But when I use that gpu and use both 8 and 6 pin it wont boot. There is a click and thats it, wont even go to BIOS.
RE: Pc wont boot with RTX 3060 - DramaKing - Dec 16, 2024
(Dec 16, 2024 08:20 AM)Skidsuper Wrote: I am using a cheiftec 750C powersupply which should have more then enough power. When I swap with my older amd gpu it runs ok. But when I use that gpu and use both 8 and 6 pin it wont boot. There is a click and thats it, wont even go to BIOS.
That doesn't sound like a power issue. Maybe the 3060 is defective? Or the PSU doesn't like the 6 pin being plugged in, which doesn't sound very likely.
RE: Pc wont boot with RTX 3060 - Moooookie - Dec 16, 2024
Sounds more like a hardware conflict, or resource conflict then an issue with the power supply.
RE: Pc wont boot with RTX 3060 - Biggy_Asian - Dec 19, 2024
This is why you should research if your parts are compatible and upgrade ACCORDINGLY. Its not hard to use fucking google bro.
RE: Pc wont boot with RTX 3060 - SIM-2502833 - Dec 19, 2024
Could be a BIOS setting if its set to run on older PCIE versions or you have a riser cable.
RE: Pc wont boot with RTX 3060 - F4tDoinkz - Dec 19, 2024
Sounds to me either a bios issue which I think is unlikely, or a defective GPU which is possible.
RE: Pc wont boot with RTX 3060 - Skidsuper - Feb 27, 2025
(Dec 19, 2024 08:49 PM)F4tDoinkz Wrote: Sounds to me either a bios issue which I think is unlikely, or a defective GPU which is possible.
I took it to a repair center, they diagnosed one of the power cable is faulty. After fixing it works fine now. Running small llms and diffusion models. Need upgrade to a better graphics card though.