Hello Guys + Gals ✌
CYBERGATE RAT
In this tutorial i will be showing you how to:
-Set up your 'No-IP'
-Set up cyberGate
-Build your CyberGate server
-Port Forwarding
I'm sure there's plenty of tutorials about this, however im trying to simplify and make mine more easily understandable.
Okay here we go;
Step One: Setting up a 'No-IP' Account
1: Go to http://www.No-ip.com
2: Create an account, log in and then press 'Add Host'
3: Now name your host to whatever you want. For example I will name my host xzxmikedxzx.no-ip.biz. Just follow these settings then press Create Host.
[img]http://img188.imageshack.us/img188/5374/26790935.jpg[/img]
4: Now go here - https://www.no-ip.com/downloads.php and download No-IP's Dynamic DNS Update Client,
5: Once downloaded, install it. Then open it up and put in your account name and password. Then it should update, after it does check the box next to your no-ip host.
It should look something like this:
[img]http://img69.imageshack.us/img69/7596/newlc.jpg[/img]
You are now finished setting up No-IP!
Step Two: Setting Up CyberGate
1: Download CyberGate and open it. You can find the download in Cyber-Sec's forum, which you need at least 5 posts to obtain - http://www.cyber-sec.org/forum/ or you can download it here - http://www.mediafire.com/?mmwwnj5ofzz
2: Now click Control Center - Start
3: Click Control Center - Options - Select Listening Ports And Do Following:
[img]http://img189.imageshack.us/img189/5902/32695328.jpg[/img]
You are now done with setting up CyberGate!
Step Three: Building Your CyberGate Server
1: Click Control Center - Builder - Create Server. Make a user named Hacker and press Ok.
[img]http://img192.imageshack.us/img192/7213/79780787.jpg[/img]
2: Mark the user "Hacker" And press Forward.
3: Press 127.0.0.1 | Port 999 and press Delete:
[img]http://img192.imageshack.us/img192/9475/61496758.jpg[/img]
4: After that, Click Add.
5: A Box should pop up saying: 127.0.0.1:81. Remove everything and change it with the No-ip address host you added. So let's say you used example.no-ip.biz. Change 127.0.0.1:81 to example.no-ip.biz:82. So it should look like this:
[img]http://img687.imageshack.us/img687/3674/79540144.jpg[/img]
6: Now Change the
Identification: remote
Password: cybergate
To This:
Identification: Cyber
Password: 123456
7: Go to the next tab "Installation"
8: Use the Exact same settings as i do:
[img]http://img535.imageshack.us/img535/5140/newn.jpg[/img]
Important Info:
Most people set the Installation Directory as System. I talked to jonhyk (the creator of cybergate) and he advised not to do this when using UAC bypass (which you want on). This is because, from jonhyk himself, "cybergate is not able to write into protected folders if UAC is enabled". I also don't use Winlogon.exe for the File Name because Windows Defender catches cybergate if you do so. So it is best using my settings as shown above.
9: Now Skip the Message, Keylogger, and Anti Debug tabs, since these are already set up right for us.
10: In The Build Server have the exact same settings checked as I do.
Except Google Chrome Passwords is optional. If you would like to have it checked like I do, go to http://www.110mb.com and create an account. Then log in to your account and go to file manager. Then click upload and upload sqlite3.dll (it is located in the same folder cybergate is located on your computer). Then once you check Google Chrome Passwords on Cybergate it will ask for a link, put in http://www.username.110mb.com/sqlite3.dll
[img]http://img85.imageshack.us/img85/955/21251752.jpg[/img]
11: Press Create Server and save the settings.
You are now done creating you server! (RAT)
Step Four: Forwarding Your Ports
Your now going to have to forward port 82 on your router if you have not done so, this is how:
1: Click Start on your computer and click Run. If you have Vista and I think Windows 7, you need to search Run in the search bar in the start menu, then click Run.
2. Type cmd and hit enter.
3. type ipconfig and press enter.
4. You should see something like this, write down or remember these last digits that I selected in the picture below:
[img]http://img341.imageshack.us/img341/2904/newa.jpg[/img]
5. Now go to http://www.portforward.com
6. Scroll down and select your router.
7. Scroll down and you should see a bunch of programs, click "1st SMTP Server"
8. You should see at the top telling you to enter your static IP
[img]http://img444.imageshack.us/img444/5174/newzi.jpg[/img]
9: Type in the digits I had you remember in step 4. My digits were 114 so I entered that.
10. Now just follow the tutorial, but when it says forward port 25, forward port 82 instead.
11. Once you are done, go to http://www.canyouseeme.org
12. Type in 82 in the box next to "What Port?" and click check.
13. If you got "Error: I could not see your service on IP ADDRESS HERE on port (82) Reason: Connection refused" Make sure your firewall is off and try again.
14. You should get "Success: I can see your service on ADDRESS HERE on port (82) Your ISP is not blocking port 82"
Port 82 should now be open! 🎉
You Will Now Need To Crypt Your server To Make It FUD:
Search forums on how to do this - Hope you enjoyed and understood
Feel free to PM me over any issues.
I will try and get back to you ASAP
HAD OVER 1000 VIEWS -- KEEP THE FEEDBACK ROLLING =P
NOW FOR THE MOST IMPORTANT BIT [ READ ]
|
|
|
V
THIS THREAD TOOK 3 HOURS OF MY TIME AND PATIENCE TO MAKE
IT WOULD ONLY TAKE YOU 1 MINUIT TO POST THANKYOU
APRECIATED 🎉🎉🎉
CYBERGATE RAT
In this tutorial i will be showing you how to:
-Set up your 'No-IP'
-Set up cyberGate
-Build your CyberGate server
-Port Forwarding
I'm sure there's plenty of tutorials about this, however im trying to simplify and make mine more easily understandable.
Okay here we go;
Step One: Setting up a 'No-IP' Account
1: Go to http://www.No-ip.com
2: Create an account, log in and then press 'Add Host'
3: Now name your host to whatever you want. For example I will name my host xzxmikedxzx.no-ip.biz. Just follow these settings then press Create Host.
[img]http://img188.imageshack.us/img188/5374/26790935.jpg[/img]
4: Now go here - https://www.no-ip.com/downloads.php and download No-IP's Dynamic DNS Update Client,
5: Once downloaded, install it. Then open it up and put in your account name and password. Then it should update, after it does check the box next to your no-ip host.
It should look something like this:
[img]http://img69.imageshack.us/img69/7596/newlc.jpg[/img]
You are now finished setting up No-IP!
Step Two: Setting Up CyberGate
1: Download CyberGate and open it. You can find the download in Cyber-Sec's forum, which you need at least 5 posts to obtain - http://www.cyber-sec.org/forum/ or you can download it here - http://www.mediafire.com/?mmwwnj5ofzz
2: Now click Control Center - Start
3: Click Control Center - Options - Select Listening Ports And Do Following:
[img]http://img189.imageshack.us/img189/5902/32695328.jpg[/img]
You are now done with setting up CyberGate!
Step Three: Building Your CyberGate Server
1: Click Control Center - Builder - Create Server. Make a user named Hacker and press Ok.
[img]http://img192.imageshack.us/img192/7213/79780787.jpg[/img]
2: Mark the user "Hacker" And press Forward.
3: Press 127.0.0.1 | Port 999 and press Delete:
[img]http://img192.imageshack.us/img192/9475/61496758.jpg[/img]
4: After that, Click Add.
5: A Box should pop up saying: 127.0.0.1:81. Remove everything and change it with the No-ip address host you added. So let's say you used example.no-ip.biz. Change 127.0.0.1:81 to example.no-ip.biz:82. So it should look like this:
[img]http://img687.imageshack.us/img687/3674/79540144.jpg[/img]
6: Now Change the
Identification: remote
Password: cybergate
To This:
Identification: Cyber
Password: 123456
7: Go to the next tab "Installation"
8: Use the Exact same settings as i do:
[img]http://img535.imageshack.us/img535/5140/newn.jpg[/img]
Important Info:
Most people set the Installation Directory as System. I talked to jonhyk (the creator of cybergate) and he advised not to do this when using UAC bypass (which you want on). This is because, from jonhyk himself, "cybergate is not able to write into protected folders if UAC is enabled". I also don't use Winlogon.exe for the File Name because Windows Defender catches cybergate if you do so. So it is best using my settings as shown above.
9: Now Skip the Message, Keylogger, and Anti Debug tabs, since these are already set up right for us.
10: In The Build Server have the exact same settings checked as I do.
Except Google Chrome Passwords is optional. If you would like to have it checked like I do, go to http://www.110mb.com and create an account. Then log in to your account and go to file manager. Then click upload and upload sqlite3.dll (it is located in the same folder cybergate is located on your computer). Then once you check Google Chrome Passwords on Cybergate it will ask for a link, put in http://www.username.110mb.com/sqlite3.dll
[img]http://img85.imageshack.us/img85/955/21251752.jpg[/img]
11: Press Create Server and save the settings.
You are now done creating you server! (RAT)
Step Four: Forwarding Your Ports
Your now going to have to forward port 82 on your router if you have not done so, this is how:
1: Click Start on your computer and click Run. If you have Vista and I think Windows 7, you need to search Run in the search bar in the start menu, then click Run.
2. Type cmd and hit enter.
3. type ipconfig and press enter.
4. You should see something like this, write down or remember these last digits that I selected in the picture below:
[img]http://img341.imageshack.us/img341/2904/newa.jpg[/img]
5. Now go to http://www.portforward.com
6. Scroll down and select your router.
7. Scroll down and you should see a bunch of programs, click "1st SMTP Server"
8. You should see at the top telling you to enter your static IP
[img]http://img444.imageshack.us/img444/5174/newzi.jpg[/img]
9: Type in the digits I had you remember in step 4. My digits were 114 so I entered that.
10. Now just follow the tutorial, but when it says forward port 25, forward port 82 instead.
11. Once you are done, go to http://www.canyouseeme.org
12. Type in 82 in the box next to "What Port?" and click check.
13. If you got "Error: I could not see your service on IP ADDRESS HERE on port (82) Reason: Connection refused" Make sure your firewall is off and try again.
14. You should get "Success: I can see your service on ADDRESS HERE on port (82) Your ISP is not blocking port 82"
Port 82 should now be open! 🎉
You Will Now Need To Crypt Your server To Make It FUD:
Search forums on how to do this - Hope you enjoyed and understood
Feel free to PM me over any issues.
I will try and get back to you ASAP
HAD OVER 1000 VIEWS -- KEEP THE FEEDBACK ROLLING =P
NOW FOR THE MOST IMPORTANT BIT [ READ ]
|
|
|
V
THIS THREAD TOOK 3 HOURS OF MY TIME AND PATIENCE TO MAKE
IT WOULD ONLY TAKE YOU 1 MINUIT TO POST THANKYOU
APRECIATED 🎉🎉🎉