[Jake Ekaj]

1. Setting A Connection As A HTTP Proxy

1. Open and Start CyberGate

2. At the top, you are going to look for WAN / LAN

[img]http://img24.imageshack.us/img24/8997/13112152.jpg[/img]

3. Now in that Category, you are going to want to look for an IP that is the same in both WAN (wide area network) and LAN (local area network) such as this one 72.190.62.182 / 72.190.62.182 (IP Changed For Security Reasons):

[img]http://img706.imageshack.us/img706/1248/61215231.jpg[/img]

If you see one that the WAN and LAN are not the same such as this one 72.237.182.183 / 192.168.1.120 (IP Changed For Security Reasons), Then this will not work, since that means that they are on a router.

[img]http://img294.imageshack.us/img294/7725/76840978.jpg[/img]

4. So after we found an IP that has both the same WAN and LAN, we are going to Right Click on the Connection then go to Net Tools - HTTP Proxy - Start

[img]http://img52.imageshack.us/img52/3587/77019965.jpg[/img]

5. Then it will ask for a Port. Type in 4500, and press OK.

[img]http://img442.imageshack.us/img442/4739/23614246.jpg[/img]

You are now done setting your connection as a HTTP Proxy in CyberGate!

2. A. Firefox Users (If You Use IE, Go To Number 2. B.)

1. Open Firefox, and click Tools - Options.

[img]http://img408.imageshack.us/img408/1295/85061610.jpg[/img]

2. Click Advanced - Network - Settings...

[img]http://img237.imageshack.us/img237/4600/86792942.jpg[/img]

3. Mark the Manual Proxy Configuration Bubble, Type In The IP of The Connection That You Set Up As An HTTP Proxy, and Under Port Type In 4500. Then Press Ok. Then Press Ok again.

[img]http://img175.imageshack.us/img175/2833/93676794.jpg[/img]

4. Go To www.ipchicken.com and it should now show your Connections IP.

You Have Now Successfully Used A Connection As A HTTP Proxy With Firefox!


2. B. IE Users

1. Open IE, and click Tools - Internet Options

[img]http://img36.imageshack.us/img36/7536/67077699.jpg[/img]

2. Click Connections - Lan Settings

[img]http://img200.imageshack.us/img200/9985/20498924.jpg[/img]

3. Check mark Use a proxy server for your LAN. Under Address Type in The IP of the Connection you set up to use. Under Port, type 4500. Then Press Ok, and press Ok again.

[img]http://img69.imageshack.us/img69/3605/99460184.jpg[/img]

4. Go To www.ipchicken.com and it should now show your Connections IP.

You Have Now Successfully Used A Connection As A HTTP Proxy With IE!

Made By Jake Ekaj

[d4rkm4n]

Nice tutorial!

If you can make one for BlackShades it would be great..

=)

[Cubee]

Cool tutorial you did, Allot of users ask this.

[Jake Ekaj]

I might make one for darkcomet and black shades in the future. Anyways glad you guys like it.

[_Magnifico_]

DarkComet Socks do not work .. Even if the victim is not behind a router .. Anyway if some has a good reverse proxy that you can install it on the victims pc it would be a great share ..

[Jake Ekaj]

DarkComet Socks do not work .. Even if the slave is not behind a router .. Anyway if some has a good reverse proxy that you can install it on the victims pc it would be a great share ..

I remember a program called like dexter's reverse proxy or something like that. You may be able to find it if you search around.

[_Magnifico_]

I remember a program called like dexter's reverse proxy or something like that. You may be able to find it if you search around.

The version of DRP is outdated and isint working anymore i have it on my pc but its no good ... i found that the only good reverse proxy anyone can find is the one that you`ll code yourself or buy for a lot of $..

[Jake Ekaj]

Glad this has helped some people, hopefully it helps more too.

[Osiris1717]

Good guide, thanks for the share. Keep up the good work.