May 24, 2011 08:55 AM
(This post was last modified: May 24, 2011 09:08 AM by BlackChaos.)
Hey guys 🤝
This is my first real contribution to the Remote Administration Tools forum and I hope you all like it.
So far, to my knowledge, there is no guide similar to this on HF. But if there is, then know that I have not leeched anything from it. This is from my own experience and usage of this program.
First off, What is Simple Port Forwarding?
It is a program which assists you in port forwarding bu automating the entire process. So, instead of fiddling around your modem, you can safely and efficiently port forward without any cost. Yes. This program is, above all, FREE.
Before we begin, you'll need to download Simple Port Forwarding [Free Version]
You can find it over here at their official website:
Download - Simple Port Forwarding
After you've installed the program, open it and get your groove on:
I have highlighted in red all those fields which you need to change and those things which you need to look out for.
[img]http://i1210.photobucket.com/albums/cc404/BlackChaos619/1.png[/img]
First of all, select the drop down list and choose your modem. This program supports many modems including the following:
Simple Port Forwarding: List Of Supported Routers
So if you can't find your modem, you can request for it on their site.
After you've selected your modem, you can check whether its the correct modem by checking out the display pic on the right side.
Enter your Router IP address, and the Router username and password.
If you don't know you username and password, try one of these:
Spoiler (Click to View)
Then click on "Update Router" and let the program automatically fill in the details in your router page.
[img]http://i1210.photobucket.com/albums/cc404/BlackChaos619/2.png[/img]
On the right side, there should already be a small window similar to the one in the picture above.
If its not already there, go to Tools > Getting Started
Click on the button in the fourth option which says "Do It Now".
This will lead you to another window which will begin your Port Forwarding process.
[img]http://i1210.photobucket.com/albums/cc404/BlackChaos619/3.png[/img]
In this window, there is nothing of use unless you're looking for alternative port forwarding for games, etc. But since we're setting up for a RAT, we need to go to the Custom tab.
[img]http://i1210.photobucket.com/albums/cc404/BlackChaos619/4.png[/img]
In the Custom tab, there a few options we need to figure out.
First off, the name is quite easy. Just type in whatever name you want. Example: Cyber, Poison, etc. It can be anything.
For type, leave it as it is.
Enter 82 as your start and end port. And finally, type in your IP address.
Just click on "Add" and you're done! Congratulations! 🤗
But before we get too excited, lets calm the fcuk down and check on how we did. 😝
[img]http://i1210.photobucket.com/albums/cc404/BlackChaos619/5.png[/img]
Going back to the starting tools, click on the button in the seventh option which conveniently also says "Do It Now" (creativity is not a strong point here apparently)
[img]http://i1210.photobucket.com/albums/cc404/BlackChaos619/6-1.png[/img]
Now we're just going to check out if your Port Forwarding was successful or not.
Enter your Port Number which, if you've been following this guide to the letter, will be 82. Leave the Type as TCP.
Note: Make sure your listening IP is correctly matching your IP.
Now just click on Begin and watch the automated testing procedure.
Note: If the procedure does not automate, just enter your port number in the web page which opens up within the window.
[img]http://i1210.photobucket.com/albums/cc404/BlackChaos619/7-1.png[/img]
If you've done everything correctly, then you should be seeing what I'm seeing. SUCCESS 🤗
So thats pretty much all there is to it. Simple Port Forwarding.
Hope you guys like it. It took quite some time to get this done and it was really something.
If you do like it, any sort of appreciation would be appreciated. A comment, a PM, a bouquet of motherfreaking roses. 😅
This guide is sole property of BlackChaos on Hack Forums
If thou leeches, I shall stick a fifteen inch steel cord up thy ass.
This is my first real contribution to the Remote Administration Tools forum and I hope you all like it.
So far, to my knowledge, there is no guide similar to this on HF. But if there is, then know that I have not leeched anything from it. This is from my own experience and usage of this program.
First off, What is Simple Port Forwarding?
It is a program which assists you in port forwarding bu automating the entire process. So, instead of fiddling around your modem, you can safely and efficiently port forward without any cost. Yes. This program is, above all, FREE.
Before we begin, you'll need to download Simple Port Forwarding [Free Version]
You can find it over here at their official website:
Download - Simple Port Forwarding
After you've installed the program, open it and get your groove on:
I have highlighted in red all those fields which you need to change and those things which you need to look out for.
[img]http://i1210.photobucket.com/albums/cc404/BlackChaos619/1.png[/img]
First of all, select the drop down list and choose your modem. This program supports many modems including the following:
Simple Port Forwarding: List Of Supported Routers
So if you can't find your modem, you can request for it on their site.
After you've selected your modem, you can check whether its the correct modem by checking out the display pic on the right side.
Enter your Router IP address, and the Router username and password.
If you don't know you username and password, try one of these:
Spoiler (Click to View)
Then click on "Update Router" and let the program automatically fill in the details in your router page.
[img]http://i1210.photobucket.com/albums/cc404/BlackChaos619/2.png[/img]
On the right side, there should already be a small window similar to the one in the picture above.
If its not already there, go to Tools > Getting Started
Click on the button in the fourth option which says "Do It Now".
This will lead you to another window which will begin your Port Forwarding process.
[img]http://i1210.photobucket.com/albums/cc404/BlackChaos619/3.png[/img]
In this window, there is nothing of use unless you're looking for alternative port forwarding for games, etc. But since we're setting up for a RAT, we need to go to the Custom tab.
[img]http://i1210.photobucket.com/albums/cc404/BlackChaos619/4.png[/img]
In the Custom tab, there a few options we need to figure out.
First off, the name is quite easy. Just type in whatever name you want. Example: Cyber, Poison, etc. It can be anything.
For type, leave it as it is.
Enter 82 as your start and end port. And finally, type in your IP address.
Just click on "Add" and you're done! Congratulations! 🤗
But before we get too excited, lets calm the fcuk down and check on how we did. 😝
[img]http://i1210.photobucket.com/albums/cc404/BlackChaos619/5.png[/img]
Going back to the starting tools, click on the button in the seventh option which conveniently also says "Do It Now" (creativity is not a strong point here apparently)
[img]http://i1210.photobucket.com/albums/cc404/BlackChaos619/6-1.png[/img]
Now we're just going to check out if your Port Forwarding was successful or not.
Enter your Port Number which, if you've been following this guide to the letter, will be 82. Leave the Type as TCP.
Note: Make sure your listening IP is correctly matching your IP.
Now just click on Begin and watch the automated testing procedure.
Note: If the procedure does not automate, just enter your port number in the web page which opens up within the window.
[img]http://i1210.photobucket.com/albums/cc404/BlackChaos619/7-1.png[/img]
If you've done everything correctly, then you should be seeing what I'm seeing. SUCCESS 🤗
So thats pretty much all there is to it. Simple Port Forwarding.
Hope you guys like it. It took quite some time to get this done and it was really something.
If you do like it, any sort of appreciation would be appreciated. A comment, a PM, a bouquet of motherfreaking roses. 😅
This guide is sole property of BlackChaos on Hack Forums
If thou leeches, I shall stick a fifteen inch steel cord up thy ass.
