Apr 26, 2012 09:46 PM
1. Setting Up No-IP
Spoiler (Click to View)
1. Go to http://www.No-ip.com
2. Create an account, confirm your account through your email, then log in. Click Add Host.
3. Now name your host whatever you want. For example I will name my host gtech.servegame.com. Just follow these settings and press Create Host.
[img]http://img38.imageshack.us/img38/2449/90542533.jpg[/img]
4. Now go here - https://www.no-ip.com/downloads.php and download No-IP's Dynamic DNS Update Client if you haven't already.
5. Once downloaded, install it. Then open it up and put in your account email and password.
6. Click Select Hosts - Click the box to check mark your host - Then press Save.
It should look something like this:
[img]http://img19.imageshack.us/img19/6208/84964790.jpg[/img]
7. Click the X in the top right corner to minimize No-IP to your taskbar.
You are now finished setting up No-IP!
2. Setting Up DarkComet 5.2
Spoiler (Click to View)
1. Download DarkComet 5.2 and open it. You can download DarkComet 5.2 from their official website here - http://www.darkcomet-rat.com/process_download.php?id=9
2. Now click DarkComet-RAT at the top left - Then "Listen to new port (+Listen)" and do the following:
[IMG]http://img838.imageshack.us/img838/1682/85934444.jpg[/IMG]
3. Click DarkComet-RAT - Client settings then do the following
[img]http://img41.imageshack.us/img41/627/17811201.jpg[/img]
You are now done with setting up DarkComet!
3. Building Your DarkComet Server
Spoiler (Click to View)
1. Click DarkComet-RAT - Server Module - Full editor (Expert). Do the following:
[img]http://img193.imageshack.us/img193/4481/98875653.jpg[/img]
2. Click Network Settings. Put your No-IP DNS under IP/DNS and put 3080 under Port then click ADD.
[img]http://img94.imageshack.us/img94/813/69245229.jpg[/img]
3. I'm guessing most of you will be using a crypter. So skip Module Startup and make sure to enable startup and injection in your crypter when crypting.
ONLY if your not using a crypter do the following...
3. A. Go back to Main Settings and check Active FWB (Firewall bypass).
3. B. Go to Module Startup and do the following:
[img]http://img267.imageshack.us/img267/5893/63106734.jpg[/img]
3. C. Continue on with the tutorial.
4. Skip Install Message, Module Shield, Keylogger, Hosts Files, Add Plugins, File Binder, and Choose Icon. These are already set up correctly.
5. Click Stub Finalization. Check save the profile profile when stub successfully generated. Then click Build The Stub. Save the server as anything you'd like.
You are now done creating you server!
4. Forwarding Your Ports, If You Have Not Done So
Spoiler (Click to View)
Your now going to have to forward port 82 on your router if you have not done so, this is how:
1. Click Start on your computer and click Run. If you have Vista/Windows 7 click start and click in the search bar.
2. Type cmd and hit enter.
3. type ipconfig and press enter.
4. You should see something like this, write down or remember these last digits that I selected in the picture below:
[img]http://img341.imageshack.us/img341/2904/newa.jpg[/img]
5. Now go to www.portforward.com
6. Scroll down and select your router.
7. Scroll down and you should see a bunch of programs, click "1st SMTP Server" or any program, it doesn't really matter.
8. You should see at the top telling you to enter your static IP
[img]http://img444.imageshack.us/img444/5174/newzi.jpg[/img]
9. Type in the digits I had you remember in step 4. My digits were 114 so I entered that.
10. Now just follow the tutorial, but when it says forward port 25, forward port 3080 instead.
11. Once you are done, go to www.canyouseeme.org
12. Type in 3080 in the box next to "What Port?" and click check.
13. If you got "Error: I could not see your service on IP ADDRESS HERE on port (3080) Reason: Connection refused" Make sure your firewall is off and try again.
14. You should get "Success: I can see your service on ADDRESS HERE on port (3080) Your ISP is not blocking port 3080"
Port 3080 should now be open!
You are now done with everything, have fun using DarkComet!
Hope you liked this tutorial, took a lot of time making it. Please Say Thanks!
Thanks, Jake Ekaj!
Spoiler (Click to View)
1. Go to http://www.No-ip.com
2. Create an account, confirm your account through your email, then log in. Click Add Host.
3. Now name your host whatever you want. For example I will name my host gtech.servegame.com. Just follow these settings and press Create Host.
[img]http://img38.imageshack.us/img38/2449/90542533.jpg[/img]
4. Now go here - https://www.no-ip.com/downloads.php and download No-IP's Dynamic DNS Update Client if you haven't already.
5. Once downloaded, install it. Then open it up and put in your account email and password.
6. Click Select Hosts - Click the box to check mark your host - Then press Save.
It should look something like this:
[img]http://img19.imageshack.us/img19/6208/84964790.jpg[/img]
7. Click the X in the top right corner to minimize No-IP to your taskbar.
You are now finished setting up No-IP!
2. Setting Up DarkComet 5.2
Spoiler (Click to View)
1. Download DarkComet 5.2 and open it. You can download DarkComet 5.2 from their official website here - http://www.darkcomet-rat.com/process_download.php?id=9
2. Now click DarkComet-RAT at the top left - Then "Listen to new port (+Listen)" and do the following:
[IMG]http://img838.imageshack.us/img838/1682/85934444.jpg[/IMG]
3. Click DarkComet-RAT - Client settings then do the following
[img]http://img41.imageshack.us/img41/627/17811201.jpg[/img]
You are now done with setting up DarkComet!
3. Building Your DarkComet Server
Spoiler (Click to View)
1. Click DarkComet-RAT - Server Module - Full editor (Expert). Do the following:
[img]http://img193.imageshack.us/img193/4481/98875653.jpg[/img]
2. Click Network Settings. Put your No-IP DNS under IP/DNS and put 3080 under Port then click ADD.
[img]http://img94.imageshack.us/img94/813/69245229.jpg[/img]
3. I'm guessing most of you will be using a crypter. So skip Module Startup and make sure to enable startup and injection in your crypter when crypting.
ONLY if your not using a crypter do the following...
3. A. Go back to Main Settings and check Active FWB (Firewall bypass).
3. B. Go to Module Startup and do the following:
[img]http://img267.imageshack.us/img267/5893/63106734.jpg[/img]
3. C. Continue on with the tutorial.
4. Skip Install Message, Module Shield, Keylogger, Hosts Files, Add Plugins, File Binder, and Choose Icon. These are already set up correctly.
5. Click Stub Finalization. Check save the profile profile when stub successfully generated. Then click Build The Stub. Save the server as anything you'd like.
You are now done creating you server!
4. Forwarding Your Ports, If You Have Not Done So
Spoiler (Click to View)
Your now going to have to forward port 82 on your router if you have not done so, this is how:
1. Click Start on your computer and click Run. If you have Vista/Windows 7 click start and click in the search bar.
2. Type cmd and hit enter.
3. type ipconfig and press enter.
4. You should see something like this, write down or remember these last digits that I selected in the picture below:
[img]http://img341.imageshack.us/img341/2904/newa.jpg[/img]
5. Now go to www.portforward.com
6. Scroll down and select your router.
7. Scroll down and you should see a bunch of programs, click "1st SMTP Server" or any program, it doesn't really matter.
8. You should see at the top telling you to enter your static IP
[img]http://img444.imageshack.us/img444/5174/newzi.jpg[/img]
9. Type in the digits I had you remember in step 4. My digits were 114 so I entered that.
10. Now just follow the tutorial, but when it says forward port 25, forward port 3080 instead.
11. Once you are done, go to www.canyouseeme.org
12. Type in 3080 in the box next to "What Port?" and click check.
13. If you got "Error: I could not see your service on IP ADDRESS HERE on port (3080) Reason: Connection refused" Make sure your firewall is off and try again.
14. You should get "Success: I can see your service on ADDRESS HERE on port (3080) Your ISP is not blocking port 3080"
Port 3080 should now be open!
You are now done with everything, have fun using DarkComet!
Hope you liked this tutorial, took a lot of time making it. Please Say Thanks!
Thanks, Jake Ekaj!
