[gunyounoob]

Hello HF i have been learning how to read Binary Code the way i have been learning is nice and simple i want you to try my method at this and crack my codes ill be making more as well for you guys

Code

This is the way i crack the code

a=01100001
b=01100010
c=01100011
d=01100100
e=01100101
f=01100110
g=01100111
h=01101000
i=01101001
j=01101010
k=01101011
l=01101100
m=01101101
n=01101110
o=01101111
p=01110000
q=01110001
r=01110010
s=01110011
t=01110100
u=01110101
v=01110110
w=01110111
x=01111000
y=01111001
z=z
space bar=00100000

ok i want you guys to crack theses codes and post down below if you want

Code

theses one are nice and simple

01101000 01100101 01101100 01101100 01101111 00100000 01110111 01101111 01110010 01101100 01100100

01101001 00100000 01110011 01100101 01100101 00100000 01111001 01101111 01110101 00100000 01101000 01100001 01110110 01100101 00100000 01100011 01110010 01100001 01100011 01101011 01100101 01100100 00100000 01101101 01100101 00100000


01110111 01100101 01101100 01101100 00100000 01100100 01101111 01101110 01100101 00100000 01101000 01100001 01100011 01101011 00100000 01100110 01101111 01110010 01110101 01101101 01110011 00100000


01110100 01101000 01101001 01110011 00100000 01101111 01101110 01100101 00100000 01110111 01101001 01101100 01101100 00100000 01100010 01100101 00100000 01101110 01101001 01100011 01100101 00100000 01100001 01101110 01100100 00100000 01101100 01101111 01101110 01100111 00100000 01101001 00100000 01101000 01101111 01110000 01100101 00100000 01111001 01101111 01110101 00100000 01100100 01101111 01101110 01110100 00100000 01100111 01100101 01110100 00100000 01101101 01100001 01100100 00100000 01100001 01110100 00100000 01110100 01101000 01101001 01110011 00100000 01100010 01100101 01100011 01100001 01110101 01110011 01100101 00100000 01110111 01100101 00100000 01100100 01101111 01101110 01110100 00100000 01110111 01100001 01101110 01110100 00100000 01111001 01101111 01110101 00100000 01110100 01101111 00100000 01100100 01101001 01100101 00100000

[katokato]

What the fuck is this?
If youre gonna post a tutorial, at least do it right.
Unless youre using sarcams, in which case: nice job in trolling me.

[alon100009]

Thanks for the tutorial, Very useful

[thegentlad22]

Reading binary for what system?

I don't get how this is a tutorial since you don't specify what system you're using. Yes we know binary but that is a numerical system. You said you can read binary. Yet, binary is nothing but numbers and each different computer system uses them differently then compared to other computer systems. If all systems used the binary system the same then everyone that made apps wouldn't need to make apps for each different system. 🤝

[n3bul0n]

Reading binary for what system?

I don't get how this is a tutorial since you don't specify what system you're using. Yes we know binary but that is a numerical system. You said you can read binary. Yet, binary is nothing but numbers and each different computer system uses them differently then compared to other computer systems. If all systems used the binary system the same then everyone that made apps wouldn't need to make apps for each different system. 🤝

WTF are you talking about? Ever heard of ASCII?

[BaussHacker]

Well I also made a tutorial some time ago :)
https://hackforums.net/showthread.php?tid=3308352

You don't really do a lot of explanation.

[thegentlad22]

WTF are you talking about? Ever heard of ASCII?

Yes, WTF are you talking about? Binary isn't ASCII. Binary is numerical system. Do you know what binary actually is? 😅😑

[Cody8295]

Why aren't you teaching the user how binary actually works and in relation to ASCII code?

[BaussHacker]

Yes, WTF are you talking about? Binary isn't ASCII. Binary is numerical system. Do you know what binary actually is? 😅😑

Also looks like you have no idea how the computer is storing characters. It's storing the bits of characters in binary. Hence why you can translate binary to string and string to binary.

@OP your chart is invalid, because your binary numbers is for upper-case characters.

[thegentlad22]

Also looks like you have no idea how the computer is storing characters. It's storing the bits of characters in binary. Hence why you can translate binary to string and string to binary.

@OP your chart is invalid, because your binary numbers is for upper-case characters.

I do know how computers work and how they store things. It's done via binary. However, it seems like you don't know that binary is a numerical system.

That means if a computer system uses 2 to run an OS command called write. Yet, another computer system might use 6 to use their own write function.

It don't mean every computer and every electronic device uses 2 for their write function. It also means that not all computer systems and electronic system will always have a write function or have the same functionality as the write functions other systems have.

It solely depends on the computer engineer that makes the system.

Binary is a numerical system. everything a computer does is actually done in binary. The characters you actually see on the computer screen are actually in binary and so is the images and video.

I am asking OP on what system is he reading binary from?

[BaussHacker]

This is not system specified, it's the ASCII chart.

Also binary is like a light switch, either it's on or it's off.

[thegentlad22]

Also looks like you have no idea how the computer is storing characters. It's storing the bits of characters in binary. Hence why you can translate binary to string and string to binary.

@OP your chart is invalid, because your binary numbers is for upper-case characters.

Actually it's not just storing them in binary it's all in binary on a computer raw level.

ASCII is a standard. That is my point. If you created your own computer system you don't need to follow standards. Yes, it's system specific because not all systems follow the ASCII standards.

---

This is not system specified, it's the ASCII chart.

Also binary is like a light switch, either it's on or it's off.

Wrong again!! Shows you know little about binary.

Binary means 2. When we talk in computer technology we are talking about the numerical system we call binary. Binary isn't like a switch and it's not about being on or off.

It's actually not a switch at all. It's the numerical system. You're talking about signals. Yes, signals don't turn off. 1 Means high and 0 means low.
It means 1 means high meaning voltage high and 0 means voltage low. It's talking about the signals high and low point of the cycle.

You can read more about it on wiki: http://en.wikipedia.org/wiki/Logic_level

no, I knew about this years ago. I took electronics classes in highschool and do know electronic engineering.

When you say you can read binary. It's impossible since binary is a numerical system.
You have to specify what you mean by it.

What you said is a format. It's a standard that most electronic devices use or should be using. However, that isn't for every single electronic gadget out there.

If you built your own compute today from scratch you would have the control as to what bit sequences would draw an A on the computer or tv screen. You being the engineer and designer have 100% control over it. If you buy computer chips from the market then most likely they will use the standards. If you bought a chip from someone that isn't popular or well known. Then you're taking a risk they might have created their own system.

Binary by itself is meaningless. Just like our numerical 10 digit system.

When I say 115. do you know what I am talking about.

If i say it cost me 115... would you still know what I am talking about?

you can say yes you're talking about money...yes but what currency. I never specified the currency. It could be U.S dollars, Euros?? etc.

but the thing is that you being the designer you can say '115 means money or $115 means U.S dollars.

Now I could have said 115 units. that would mean items.

Like I said 115 could be anything. It depends on how you use it.

same goes with binary or any numerical system. 🤝

---

This is not system specified, it's the ASCII chart.

Also binary is like a light switch, either it's on or it's off.

Wouldn't it be better to let us know this? He could have said I know ASCII standards in binary. This would have let us know at the start. Yet, read the title of the thread.

Binary Code reading simple way. What would you make out from just the title? there is no indication that he is talking about ASCII standards in binary.

[katokato]

Can you guys stop bikeshedding?
This is a fucking pointless discussion.
Just stfu. It was a shit tutorial and we shouldnt even be giving this much attention to it.

[ApolloCreeps]

Code Cracked

hello world i see you have cracked me well done hack forums this one will be nice and long i hope you dont get mad at this because we dont want you to die

[PhobicHD]

Ok just cause it pisses me off that he didn't really complete a tutorial.

ASCII is very simple when you understand binary. The binary number system is base two just as the decimal system is base 10. The idea is that every decimal place in decimal system is one higher exponent of ten. So 162 is really 2*10exp0 + 6*10exp1 + 1*10exp2 or 2 + 60 + 100. Binary is the same only each "decimal place" is a higher exponent of two. So 0110 would be 0 *2exp0 + 1*2exp1 + 1*2exp2 + 0*2exp3 or 0+2+4+0.

You will notice decimals are from 0-9 however in the binary system there is only 0 and 1 per "decimal place". Also notice that in our number system the first decimal we see is the largest exponent of 10 and the last is the smallest eg 100 is one hundred not one. This is called endianess. Our number system is big endian which means the biggest comes first. The opposite would be little endian. When I am refering to binary numbers I will be using big endian. All intel processors are little endian however.

Anyway now that you understand binary somewhat you should know every byte is 8 bits. So.one byte can represent 2exp8 or 256 different states. ASCII neglects to use the highest bit so there are only 128 ASCII characters. The first 32 characters are non prinatable characters so from 00 to 0010000. They include things like spaces and the characters used to make newlines. The next 32 are punctuation and numbers. So 00100001 to 0100. The numbers 0-9 are themselves plus 00110000. The third set of 32 are the uppercase letters. So 01001 to 01100. Capital 'A' is 65 (32+ 32 plus one). Since there are only 26 letters the remaining numbers are other symbols. The last 32 symbols are the lower case letters and again more symbols. So from 01100001 to 011. 79 (32+32+32 plus one) is the lower case 'a'. Notice how in his post all of the letters start with 011xx. I could simply count the number after the 011 ie the xx and if I substituted that to a letter as you would naturally ( a=1, b=2, c=3) then you would know your message, without having to look it up.

Sorry for kind of taking over the post and writing a lot but yeah. Correct anything that's wrong.