[FluxHax]

Thanks for the work. I appreciate the effort too. I will follow the tutorial.

EDIT:
Sorry if is asking too much. Can you write the hex colors, the "gifs" are terrible and I like the combination.

Thank you 🤨

[ced.feludas]

Very very handy and detailed tut. Thanks mate.

[53CUR1TY]

Appreciate the tutorial, keep it up!

[Ibizaganger98]

Learned a lot of this. Thanks man, great tut!

[freemium]

just got wireshark and commView for wifi, now I can play with them, good tutorials:)

[freemium]

I saved all your tutorials for offline use, I hope you don't mind...

---

I tryed with linux and it worked...when I entered usb...was a password prompt, I dont know how I did it, but I used plop boot manager to run backtrack, and I was in...I could explore the HDD...
thanks:) you're the best:)where's the like button ?

[UnKnOwN333]

I spent a little over 2 hours writing this, so I'd really apprciate feedback :) Thanks!

This is going to be a fairly long tutorial on Wireshark. This is if you have had some sort of experience with wireshark and nmap, and you should have an above-average understanding of some basic protocols.

We will be covering some major scans including:

TCP Scans (Transmission Control Protocol)

~ TCP SYN scan === nmap -sS
Explanation: Sends a SYN packet to an IP's ports

~ TCP Christmas Scan === nmap -sX
Explanation: Sends a TCP packet with the flags PSH, URG, and FIN set

~ TCP Null Scan === nmap -sN
Explanation: Sends NO TCP flags (easy to detect)

~ TCP FIN Scan === nmap -sF
Explanation: Sends only a TCP FIN header

---

We will ONLY be covering TCP as it is the most common. If you're interested in SCTP/UDP scans, feel free to PM me!'

---

Make a New Color Scheme

We will be making our OWN color scheme. The default wireshark theme is never meant to be used. It's malleable and meant to be played with.

Here is how we do that:
[img]http://i.minus.com/ijAruJPOAJyOI.gif[/img]

I'm going to set some of the default colors to my own.

Protocol - Background Color / Text Color
TCP - Dark Green / White
UDP - Dark Blue / White
ARP - Orange / Black

I have also set HTTP to Dark Green / Yellow off-camera.

This should color QUITE A BIT of the packets green and blue since 90% of them run on either TCP or UDP.

Here's how:
[img]http://i.minus.com/ik9XJOSlm4HNT.gif[/img]

Run an NMap Scan and Look at Packets

1. Nmap SYN Scan (nmap -sS -v -n 192.168.1.1):

Alrightm so here is what the scan looks like in wireshark:


Let's look at the coloring rule and see why each is which. This is very easy.

Make sure the "Packet Details" panel is available. Click View -> Packet Details

The red is simple. It's just a RST (reset) or RST ACK packet

Alright, now click on the packet you'd like to see and expand the "Frame" tag. Then you can look at the colorize rule and see exactly why it's colored the way it is.



We can see that all of this grey is a TCP SYN packet. Hopefully you know that SYN requests are very common throught a network. When initiating a TCP connection (every time you visit a website), a SYN request is sent. So what makes this SYN request different than a normal SYN request?

NMAP SYN scans have a TCP window size of:
- 1024
- 2048
- 3072
- 4096

while normal SYN window sizes are usually much larger and vary constantly. So this is our key! We can also note that the FIN header is always on.

So, let's write a rule. Here are some things you should note:

&& = and. Ex: tcp && udp = that will show something that has both TCP and UDP protocols
|| = or. Ex: tcp || udp = this will show anything that is either TCP OR UDP
! = not. Ex: !tcp = this will show everything that is NOT TCP protocol

That's pretty much it!

So we know that it is TCP so let's just make sure it's TCP:

Code

tcp

Alright. So we also know that the TCP FIN header is also on. So let's write that as well:

Code

tcp && tcp.flags.fin ==1

Alright, this may be just a little confusing if you're not a coder. Basically, we want to see if the window size is any of the aforementioned window sizes. If any of them match (they can't all match) then this will definitively prove a SYN scan without much chance for false positive. We are going to set this aside with () and will use || inside them. Let's see:

Code

tcp && tcp.flags.fin ==1 && (tcp.window_size==1024 || tcp.window_size==2048 || tcp.window_size==3072 || tcp.window_size==4096)

Here I show a real SYN request (grey) and a NMap SYN request (orange).

[img]http://i.minus.com/ibgdhP8pXd4DrT.gif[/img]

There we go! We have finished our first scan!!! Now we can detect a very basic TCP SYN Scan!!! Hoorah!

2. Christmas Scan (nmap -sX -v -n 192.168.1.1):

Alright, let's see the packet as we scan it. Open any packet you find and look at the packet details :)

What do we notice?

• Flag size = 0x29 in hex in EVERY PACKET
  
• PSH, URG, FIN set in EVERY PACKET
  
• It runs on TCP
  

Alright, lt's go ahead and write a simple rule based on what we've noticed:

It's TCP only, right? Yes.

Code

tcp

Now lets make sure the flag size is 0x29

Code

tcp && tcp.flags==0x29

Now, lastly, we need to specify the headers that are set:

Code

txp && tcp.flags==0x29 && tcp.flags.fin==1 && tcp.flags.push==1 && tcp.flags.urg==1

And that's our rule! That will detect a Xmas scan!

[img]http://i.minus.com/ibpjEgncCyz3C4.gif[/img]

3. TCP Null Scan (nmap -sN -v -n 192.168.1.1):

This is a very obvious one to detect...

What do you notice?

• TCP Flags is 0. There are NONE SET
  
• Winddow size is the same as all the others (1024, 2048, 3072, 4096)
  

Again, let's write the rule.

Code

tcp

Code

tcp && tcp.flags==0x00 && (tcp.window_size==1024 || tcp.window_size==2048 || tcp.window_size==3072 || tcp.window_size==4096)

Now you can follow the last 2 tutorials to add your own color-coded scheme :)

This one I want you to do yourself!

First write what you notice. Once you're done, open the spoiler and see if you get the same things I have:

Spoiler (Click to View)
I noticed:

• Flags = 0x001
  
• Only the FIN bit is set
  
• Runs on TCP
  
• Windows size (1024, 2048, 3072, 4096)
  

Okay, once you've done that, try and write a simple rule!

Spoiler (Click to View)
Here is my final result

Code

tcp.flags==0x01 && tcp.flags.fin==1 && (tcp.window_size==1024 || tcp.window_size==2048 || tcp.window_size==3072 || tcp.window_size==4096)

Hopefully you've got this too ;D If not, you should re-read the tutorial. I hope you guys enjoyed this!

Tutorial by Goodies. I Hope You Enjoyed!

~ Goodies ♥

The Best HQ Member Pentesting Expert !!!!

[Goodies]

The Best HQ Member Pentesting Expert !!!!

There's no need to quote the entire thread.
Also, this is very old and not at all advanced, but I appreciate the sentiment.

[UnKnOwN333]

There's no need to quote the entire thread.
Also, this is very old and not at all advanced, but I appreciate the sentiment.

bro have you skype ? can i add you in skype :) whats your username or you add me my name : Razor-Unknown

[Goodies]

bro have you skype ? can i add you in skype :) whats your username or you add me my name : Razor-Unknown

https://keybase.io/goodies
Skype is goodieshq

[radialhat]

Amazing tutorial Goodies, I've put my time to learn all you explained here during this evening...
Cheers mate

[SIM-1858092]

This is interesting! Thanks Goodies -- HQ user as always.

[Jazer]

This will help a lot of users thanks for contributing

[Goodies]

Wow, I was doing this shit 3 years ago?
I've come a long way :)

[hackeaziq]

This is so cool tutorial, i hope i can go further in my career. Hope can see many kind of tutorial like this (Y)