[Goodies]

I spent a little over 2 hours writing this, so I'd really apprciate feedback :) Thanks!

This is going to be a fairly long tutorial on Wireshark. This is if you have had some sort of experience with wireshark and nmap, and you should have an above-average understanding of some basic protocols.

We will be covering some major scans including:

TCP Scans (Transmission Control Protocol)

~ TCP SYN scan === nmap -sS
Explanation: Sends a SYN packet to an IP's ports

~ TCP Christmas Scan === nmap -sX
Explanation: Sends a TCP packet with the flags PSH, URG, and FIN set

~ TCP Null Scan === nmap -sN
Explanation: Sends NO TCP flags (easy to detect)

~ TCP FIN Scan === nmap -sF
Explanation: Sends only a TCP FIN header

---

We will ONLY be covering TCP as it is the most common. If you're interested in SCTP/UDP scans, feel free to PM me!'

---

Make a New Color Scheme

We will be making our OWN color scheme. The default wireshark theme is never meant to be used. It's malleable and meant to be played with.

Here is how we do that:
[img]http://i.minus.com/ijAruJPOAJyOI.gif[/img]

I'm going to set some of the default colors to my own.

Protocol - Background Color / Text Color
TCP - Dark Green / White
UDP - Dark Blue / White
ARP - Orange / Black

I have also set HTTP to Dark Green / Yellow off-camera.

This should color QUITE A BIT of the packets green and blue since 90% of them run on either TCP or UDP.

Here's how:
[img]http://i.minus.com/ik9XJOSlm4HNT.gif[/img]

Run an NMap Scan and Look at Packets

1. Nmap SYN Scan (nmap -sS -v -n 192.168.1.1):

Alrightm so here is what the scan looks like in wireshark:


Let's look at the coloring rule and see why each is which. This is very easy.

Make sure the "Packet Details" panel is available. Click View -> Packet Details

The red is simple. It's just a RST (reset) or RST ACK packet

Alright, now click on the packet you'd like to see and expand the "Frame" tag. Then you can look at the colorize rule and see exactly why it's colored the way it is.



We can see that all of this grey is a TCP SYN packet. Hopefully you know that SYN requests are very common throught a network. When initiating a TCP connection (every time you visit a website), a SYN request is sent. So what makes this SYN request different than a normal SYN request?

NMAP SYN scans have a TCP window size of:
- 1024
- 2048
- 3072
- 4096

while normal SYN window sizes are usually much larger and vary constantly. So this is our key! We can also note that the FIN header is always on.

So, let's write a rule. Here are some things you should note:

&& = and. Ex: tcp && udp = that will show something that has both TCP and UDP protocols
|| = or. Ex: tcp || udp = this will show anything that is either TCP OR UDP
! = not. Ex: !tcp = this will show everything that is NOT TCP protocol

That's pretty much it!

So we know that it is TCP so let's just make sure it's TCP:

Code

tcp

Alright. So we also know that the TCP FIN header is also on. So let's write that as well:

Code

tcp && tcp.flags.fin ==1

Alright, this may be just a little confusing if you're not a coder. Basically, we want to see if the window size is any of the aforementioned window sizes. If any of them match (they can't all match) then this will definitively prove a SYN scan without much chance for false positive. We are going to set this aside with () and will use || inside them. Let's see:

Code

tcp && tcp.flags.fin ==1 && (tcp.window_size==1024 || tcp.window_size==2048 || tcp.window_size==3072 || tcp.window_size==4096)

Here I show a real SYN request (grey) and a NMap SYN request (orange).

[img]http://i.minus.com/ibgdhP8pXd4DrT.gif[/img]

There we go! We have finished our first scan!!! Now we can detect a very basic TCP SYN Scan!!! Hoorah!

2. Christmas Scan (nmap -sX -v -n 192.168.1.1):

Alright, let's see the packet as we scan it. Open any packet you find and look at the packet details :)

What do we notice?

• Flag size = 0x29 in hex in EVERY PACKET
  
• PSH, URG, FIN set in EVERY PACKET
  
• It runs on TCP
  

Alright, lt's go ahead and write a simple rule based on what we've noticed:

It's TCP only, right? Yes.

Code

tcp

Now lets make sure the flag size is 0x29

Code

tcp && tcp.flags==0x29

Now, lastly, we need to specify the headers that are set:

Code

txp && tcp.flags==0x29 && tcp.flags.fin==1 && tcp.flags.push==1 && tcp.flags.urg==1

And that's our rule! That will detect a Xmas scan!

[img]http://i.minus.com/ibpjEgncCyz3C4.gif[/img]

3. TCP Null Scan (nmap -sN -v -n 192.168.1.1):

This is a very obvious one to detect...

What do you notice?

• TCP Flags is 0. There are NONE SET
  
• Winddow size is the same as all the others (1024, 2048, 3072, 4096)
  

Again, let's write the rule.

Code

tcp

Code

tcp && tcp.flags==0x00 && (tcp.window_size==1024 || tcp.window_size==2048 || tcp.window_size==3072 || tcp.window_size==4096)

Now you can follow the last 2 tutorials to add your own color-coded scheme :)

This one I want you to do yourself!

First write what you notice. Once you're done, open the spoiler and see if you get the same things I have:

Spoiler (Click to View)
I noticed:

• Flags = 0x001
  
• Only the FIN bit is set
  
• Runs on TCP
  
• Windows size (1024, 2048, 3072, 4096)
  

Okay, once you've done that, try and write a simple rule!

Spoiler (Click to View)
Here is my final result

Code

tcp.flags==0x01 && tcp.flags.fin==1 && (tcp.window_size==1024 || tcp.window_size==2048 || tcp.window_size==3072 || tcp.window_size==4096)

Hopefully you've got this too ;D If not, you should re-read the tutorial. I hope you guys enjoyed this!

Tutorial by Goodies. I Hope You Enjoyed!

~ Goodies ♥

[DrDinosaur]

Nice tutorial Goodies. Hopefully many users can apply these techniques.

[T0ucaNSaM]

Nice didnt know about the default color setting!

[PinkPanther]

Wireshark is indeed a very versatile tool.

[xSpectrex]

Nice tutorial man, looks like you put a lot of work into it :)
Much appreciated.

[Goodies]

Nice tutorial man, looks like you put a lot of work into it :)
Much appreciated.

Thank you very much :) I spent a very long time doing this. Many of the GIFs I had to record multiple times xD

[stdio]

You put a lot of effort to it so thank you :) and very HQ thread
i however feel, you should also put a little motivation so people could actually know what its all bout.
thanks again for this great work.
Regards

[Cybertooth]

Thank you very much for an outstanding Intro.

[weedy69]

Thanks a lot for this great tutorial, really nice and detailed. 🤝

[SIM-5561]

Nice tut. Effective use of gifs :) Repped.

[LetoII]

Forgot the -sV scan.

Nice tutorial on using wireshark though. Definitely a tool more people need to become familiar with, but have little idea on how to use it to its potential :).

[Goodies]

Forgot the -sV scan.

Nice tutorial on using wireshark though. Definitely a tool more people need to become familiar with, but have little idea on how to use it to its potential :).

Oh you're right...
Well, -sV is an ADDON for a TCP or UDP scan, but yeah I could show the difference between those packets ;)

~ Goodies ♥

[Goodies]

I'm going to this. I hope people become interested in this kind of stuff ;)

~ Goodies ♥

[Goodies]

Boomping for wireshark :) Anyone interested in this?

[Mad76e]

Hell yeah! This brings back some fine memorys! Good job Goodies!