[Underdоg]

I can't get my USB to mount in ubuntu, anyone ideas on what the problem could be?

I've tried everything, It's starting to annoy me now. Any help is appreciated.

[Nozreon]

Are you already tried to configure the drive letter (like F:) in windows disk management?

---

I found the same problem as yours because my flashdisk dont have drive letter (like F:) and it cant mounted. But when i open disk management in windows and give my flashdisk a drive letter, i can mount it.

---

Or your usb port has damaged. Because like you said you already tried everything. Or your flashdisk is "broken" and you must buy a new one.

[Underdоg]

Are you already tried to configure the drive letter (like F:) in windows disk management?

---

I found the same problem as yours because my flashdisk dont have drive letter (like F:) and it cant mounted. But when i open disk management in windows and give my flashdisk a drive letter, i can mount it.

---

Or your usb port has damaged. Because like you said you already tried everything. Or your flashdisk is "broken" and you must buy a new one.

I've tried a few ways I've read online. I'm sure there's a way though. And I don't have windows installed at all at moment.

My USB port isn't broken and neither is mys USB. It was working a few days ago until I clicked unmount and ever since then it won't mount again.

[Nozreon]

Ohh you click unmount? I think there is a "failure" when you unmount the flashdisk like me too. I have issue like yours but till now my flashdisk wont mount again, i i think its "broken" now.

[Underdоg]

Ohh you click unmount? I think there is a "failure" when you unmount the flashdisk like me too. I have issue like yours but till now my flashdisk wont mount again, i i think its "broken" now.

I think a few days ago when I had Windows 7 still installed it wouldn't mount on that either.

It might actually be broke altogether now after all.

[captainspalding]

Are you already tried to configure the drive letter (like F:) in windows disk management?

He's talking about mounting a USB on ubuntu and you're talking about the F: drive? and WDM? wtf???

@OP Follow the next two steps for starters:

From a terminal, before plugging in USB:
dmesg | tail

After plugging in USB:
dmesg | tail

Does anything new show up in the output the second time you run it?

[Nozreon]

He's talking about mounting a USB on ubuntu and you're talking about the F: drive? and WDM? wtf???

@OP Follow the next two steps for starters:

From a terminal, before plugging in USB:
dmesg | tail

After plugging in USB:
dmesg | tail

Does anything new show up in the output the second time you run it?

Mine cant mount because dont have drive letter (the F:). Because of that i talk about F:, for make sure if he has same problem as my problem.

[captainspalding]

Mine cant mount because dont have drive letter (the F:). Because of that i talk about F:, for make sure if he has same problem as my problem.

This has absolutely nothing to do with Linux. When you assign a USB drive F: on windows, that does nothing to the USB. That changes how windows sees the device. USB does not store this information. The only changes you make to the USB drive are formatting partitions and this is not related.

Please stop trying to help here as you do not understand the relation between USB drives and Windows drive letters, let alone how Linux kernel/drivers handle them.

[Stewie1897]

please go into terminal and paste the output of:

lsblk

be sure your drive is attached while you do this.

[__Digital__]

Run the following commands to find the disk...

Code

sudo fdisk -l

then you should see something like this:

Code

Disk /dev/sdc: 7.4 GiB, 7948206080 bytes, 15523840 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x00000000

Device     Boot Start      End  Sectors  Size Id Type
/dev/sdc1  *     8192 15523839 15515648  7.4G  b W95 FAT32

next create the mount point:

Code

mkdir /media/usb-drive

mount the drive:

Code

mount /dev/sdc1 /media/usb-drive/

next check see if it is mounted correctly:

Code

mount | grep sdc1

result if mounted correctly

Code

/dev/sdc1 on /media/usb-drive type vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=utf8,shortname=mixed,errors=remount-ro

How to access the mounted media:

Code

cd /media/usb-drive

Now to unmount the media:

Code

umount /media/usb-drive

[Underdоg]

-snip-

I've sent you a message. Thanks.

[captainspalding]

Soo did you verify your drivers picked it up with dmesg?

[Underdоg]

Soo did you verify your drivers picked it up with dmesg?

Nope, I'm clueless on Linux. I've only recently just switched over, still getting the hang of things.

[__Digital__]

Nope, I'm clueless on Linux. I've only recently just switched over, still getting the hang of things.

I have provided you the information you asked for, now you just need to put it into action.. When you showed me the drive it was /dev/sdg1 from our private messages...

Step 1.
Open Terminal

Step 2.
sudo fdisk -l should give you a list of drives connected

Step 3.
sudo mkdir /media/usb-drive

Step 4.
sudo mount /dev/sdg1 /media/usb-drive/

step 5.
mount | grep sdg1

Will produce the following if mounted correctly:

Code

/dev/sdg1 on /media/usb-drive type vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=utf8,shortname=mixed,errors=remount-ro