[- Z -]

Hello HF,

Today I was checking out a program that a fellow HF member made, And It did not follow through what it was made for. Ran with Malwarebytes, Clean but I still feel paranoid, let me know what else I should try with next thank you in advance.

😖

[ZIKO0O0]

Use several different programs to scan it not only Malwarebytes get an AV and use rouge killer and check it out with virus-total.

---

One question would you allow me to use your profile pic on hack forums.

[- Z -]

Using McAfee right now, but here is the results from VT let me know what you think.

---

Said it was clean, any other suggestions.

[- Z -]

Just today, I was smoking my juul and was close to my pc and I had Hf opened but minimize as normal then I had in cog open with my google account and shit. But then when I was smoking my screen changed to HF so I was like ok...then a window poped up and said 86% completed, relized it was transfeing my fucking files, I need some help ASAP.

[VoIPv2]

Just today, I was smoking my juul and was close to my pc and I had Hf opened but minimize as normal then I had in cog open with my google account and shit. But then when I was smoking my screen changed to HF so I was like ok...then a window poped up and said 86% completed, relized it was transfeing my fucking files, I need some help ASAP.

Upload the sample to virustotal.com if you see any list of malware names then provide that in the thread. Virustotal will scan with around 50+ Antivirus and also check the signature for new or old malware codecs. Then at worst, wait for Aura or someone from the original MRT team to provide the next steps.

[- Z -]

Upload the sample to virustotal.com if you see any list of malware names then provide that in the thread. Virustotal will scan with around 50+ Antivirus and also check the signature for new or old malware codecs. Then at worst, wait for Aura or someone from the original MRT team to provide the next steps.

Been done that, said it was clean and everything, now I just think it’s something else.

[Super]

Hey OP,
I'd be happy to help. First let's run some preliminary scans before I give you a manual checkup.

---

Step 1: Malware scan (Malwarebytes)

Download and install the free version of Malwarebytes

• 
  Note: If you have Malwarebytes already installed, you don't need to install it again. Simply start from the next bullet point
  


• Once Malwarebytes is installed, launch it and let it update his database. You might have to click on the little arrow by Scan Status in the middle right pane for it to do so
  


• Once the database update is complete, click on the Scan tab, then select the Threat Scan button and click on Start Scan
  


• Let the scan run, the time required to complete the scan depends of your system and computer specs
  


• Once the scan is complete, make sure that the first checkbox at the top is checked (which will automatically check every detected item), then click on the Quarantine Selected button
  • If it asks you to restart your computer to complete the removal, do so
    
  
  
  
  


• Click on Export Summary after the deletion (in the bottom-left corner) and select Copy to Clipboard. Paste the content in your next reply
  

Step 2: Rootkit scan (RogueKiller)

Download the right version of RogueKiller

• 
  for your Windows version (32 or 64-bit)
  


• Once done, move the executable file to your Desktop, right-click on it and select Run as Administrator (for Windows Vista, 7, 8, 8.1 and 10 users)
  


• Click on the Start Scan button in the right panel, which will bring you to another tab, and click on it again (this time it'll be in the bottom right corner)
  


• Wait for the scan to complete
  


• On completion, the results will be displayed. Click on the Open Report button in the bottom left corner, followed by the Open TXT button (also in the bottom left corner)
  


• This will open the report in Notepad. Copy/paste its content in your next reply
  

Be sure to quarantine the threats that RogueKiller and Malwarebytes detect.
Upload your logs to https://hastebin.com and give me the links in your reply.

Let me know if you have any questions 🎉
Dynamo

[- Z -]

Hey OP,
I'd be happy to help. First let's run some preliminary scans before I give you a manual checkup.

---

Step 1: Malware scan (Malwarebytes)

Download and install the free version of Malwarebytes

• 
  Note: If you have Malwarebytes already installed, you don't need to install it again. Simply start from the next bullet point
  


• Once Malwarebytes is installed, launch it and let it update his database. You might have to click on the little arrow by Scan Status in the middle right pane for it to do so
  


• Once the database update is complete, click on the Scan tab, then select the Threat Scan button and click on Start Scan
  


• Let the scan run, the time required to complete the scan depends of your system and computer specs
  


• Once the scan is complete, make sure that the first checkbox at the top is checked (which will automatically check every detected item), then click on the Quarantine Selected button
  • If it asks you to restart your computer to complete the removal, do so
    
  
  
  
  


• Click on Export Summary after the deletion (in the bottom-left corner) and select Copy to Clipboard. Paste the content in your next reply
  

Step 2: Rootkit scan (RogueKiller)

Download the right version of RogueKiller

• 
  for your Windows version (32 or 64-bit)
  


• Once done, move the executable file to your Desktop, right-click on it and select Run as Administrator (for Windows Vista, 7, 8, 8.1 and 10 users)
  


• Click on the Start Scan button in the right panel, which will bring you to another tab, and click on it again (this time it'll be in the bottom right corner)
  


• Wait for the scan to complete
  


• On completion, the results will be displayed. Click on the Open Report button in the bottom left corner, followed by the Open TXT button (also in the bottom left corner)
  


• This will open the report in Notepad. Copy/paste its content in your next reply
  

Be sure to quarantine the threats that RogueKiller and Malwarebytes detect.
Upload your logs to https://hastebin.com and give me the links in your reply.

Let me know if you have any questions 🎉
Dynamo

https://ghostbin.com/paste/adprj29s (RogueKiller)
https://justpaste.it/55rm1 (Malwarebytes)

Sorry, Hastebin is not working, and after I did one ghostbin it gave me some error so I had to use another uploader.

[Super]

https://ghostbin.com/paste/adprj29s (RogueKiller)
https://justpaste.it/55rm1 (Malwarebytes)

Sorry, Hastebin is not working, and after I did one ghostbin it gave me some error so I had to use another uploader.

Everything looks okay according to the scans - I don't think you're infected. If you still think you're infected, I can preform a manual checkup for you.

🤝
Dynamo

[- Z -]

Everything looks okay according to the scans - I don't think you're infected. If you still think you're infected, I can preform a manual checkup for you.

🤝
Dynamo

Kk, thank you and I will contact you later of if that’s fine.

[Aura]

Farbar Recovery Scan Tool (FRST) - Scan mode
Follow the instructions below to download and execute a scan on your system with FRST, and provide the logs in your next reply.

• Download the right version of FRST for your system:
  • FRST 32-bit
    
  
  
  • FRST 64-bit
    Note: Only the right version will run on your system, the other will throw an error message. So if you don't know what your system's version is, simply download both of them, and the one that works is the one you should be using.
    
  
  
  
  


• Move the executable (FRST.exe or FRST64.exe) on your Desktop
  


• Right-click on the executable and select Run as Administrator (for Windows Vista, 7, 8, 8.1 and 10 users)
  


• Accept the disclaimer by clicking on Yes, and FRST will then do a back-up of your Registry which should take a few seconds
  


• Make sure the Addition.txt box is checked
  


• Click on the Scan button
  
  


• On completion, two message box will open, saying that the results were saved to FRST.txt and Addition.txt, then open two Notepad files
  


• Copy and paste the content of both FRST.txt and Addition.txt in your next reply
  

[Super]

Let Aura help you from here. He knows what he's doing.

[- Z -]

Farbar Recovery Scan Tool (FRST) - Scan mode
Follow the instructions below to download and execute a scan on your system with FRST, and provide the logs in your next reply.

• Download the right version of FRST for your system:
  • FRST 32-bit
    
  
  
  • FRST 64-bit
    Note: Only the right version will run on your system, the other will throw an error message. So if you don't know what your system's version is, simply download both of them, and the one that works is the one you should be using.
    
  
  
  
  


• Move the executable (FRST.exe or FRST64.exe) on your Desktop
  


• Right-click on the executable and select Run as Administrator (for Windows Vista, 7, 8, 8.1 and 10 users)
  


• Accept the disclaimer by clicking on Yes, and FRST will then do a back-up of your Registry which should take a few seconds
  


• Make sure the Addition.txt box is checked
  


• Click on the Scan button
  
  


• On completion, two message box will open, saying that the results were saved to FRST.txt and Addition.txt, then open two Notepad files
  


• Copy and paste the content of both FRST.txt and Addition.txt in your next reply
  

https://ghostbin.com/paste/4e9cdut4 (FRST.txt)
https://ghostbin.com/paste/pmf9b758 (Addition.txt)

[PerfectStorm]

Its time to get a VM wouldn't you agree?

[- Z -]

Its time to get a VM wouldn't you agree?

I agree 100% but I don't have the best computer. 😖