[FairTrader]

Hello HF, I'm doing this tutorial on how to setup Darkcomet because I have seen many threads, and stuff like that on how to set it up.

Download links:
UPDATED: 11 november 2013
DarkComet 5.3.1: http://www.mediafire.com/?ctuxdv7l3va9k8k
No-ip: http://www.noip.com/downloads.php?page=win

Step 1: Download the DarkComet folder and extract it to your desktop, just delete the Winrar folder after.


Step 2: Go to http://noip.com register a account and log in to it. Then go to "Add a host" under the hostname type anything you want, but you have to remember it, leave the rest as it is and click "Update host".


Step 3: Install no-ip from the link above, open the program and log in with your no-ip account. When you are logged in, go to "Select hosts" and check the box right next to the host you just created, and then click "Save"


Step 3: Open up the DarkComet folder, and open up Darkcomet. In the left corner where it says "Dark-comet RAT" click there and click on "Listen to new port" type "8282" there, and click "listen"


Step 4: Now we are going to setup your RAT/virus that you are going to send to people. First of all click on "Dark-Comet RAT" in the left corner. Then go to "Server module" and then select "Full editor (expert)". Select "Settings_01" in the left corner. Right next to "Process mutex" there should be a button saying "Random" click on that button 5-6 times.


Step 5: Go to "Network settings" and left click on "bonke.no-ip.org" and click on "Delete selected item". Then under "IP/DNS" add your host that you created with no-ip and under "Port:" add "8282" then click on "ADD".


Step 6: Now we are finally done and need to create it, so go to
"Stub Finalization" and click "Build The Stub" now save it on your desktop and call it whatever you want. Example "XBOX 360 LIVE CRACKER" or something like that. I will just call my RAT for "Server".


We are now done setting up the RAT 🎉.
Now we have to portforward the port "8282" before this will work.

Step 1: Go to your start button in the Left corner, if you have windows. And then search for "Run" when you are in the program "Run" type "CMD" and click "OK"


Step 2: Now when "Commandprompt"/"CMD" is open type in "ipconfig", now you got to scroll a bit up, until you find "Standardgateway"


Step 3: Copy that address and paste it in your browser. Then it should ask you for a username, and password. Defualt username and password is "admin" and "password" but i'm sure you can find your own at "Portforward.com"


Step 4: Now when you are logged in, go find "Port forwarding" and then go to "Add custom rules". Under name type "HFtesting" or whatever you want, under "Start port" type "8282" and under "End Port" type "8282" and the "Protocol" should be "Both" / "UDP and TCP". under "Local IP address, you have to open up "cmd" again and type ipconfig. Then right next to "IPv4-address" there should be some numbers. You have to copy the last number and type that in the "Local IP adress".


Now we are done, congratulations you now got your own RAT, now you just have to send your server to everyone 👍.

If you need any help or if youre stuck in some part of this tutorial shoot me a PM.

[PongViking]

Very nice tutorial mate, and thanks for the link...
I was searching a lot of time to download DC...

[FairTrader]

No problem, hope you can use this :)

[splinterfire]

Great post pretty much got it all setup, thanks for the guide.

[FairTrader]

No problem, hope some more people will see it :)

---

keep this thread alive.

[-Awus-]

bookmarked mate thanks. do you mind PM me because i dont know how to test if it works?

[FairTrader]

Awus you could try it on yourself, or then try to infect someone.
Feel free to send me a PM if you need help.

[doedy]

How can you test without infecting yourself

[Modie]

nice TUT man ,
and for starter users who don't know much about port forward
if you can't open port forward you have to use VPN like HMA or any free stuff that have port forward
or look here http://portforward.com it good site for teach you how to portforward as well
hope it useful
cheers

[FairTrader]

How can you test without infecting yourself

You can try crypt it, and try it on a slave or something like that.

---

nice TUT man ,
and for starter users who don't know much about port forward
if you can't open port forward you have to use VPN like HMA or any free stuff that have port forward
or look here http://portforward.com it good site for teach you how to portforward as well
hope it useful
cheers

Thanks and I will say nVpn is the best out there, to stuff like this.

[-Awus-]

thanks mate! helped me out a lot for nothing, helped me do the whole rat set up!

[FairTrader]

No problem, feel free to PM me if you want some help.

[daynababey]

I followed this tutorial very carefully, i checked that i port forwarded properly on canyouseeme.org and it was a success, however when i try to open my server it will not find me, any idea's?

[FairTrader]

PM me your skype and I will try help you.

[Palx]

Thanks, very good guide man.
But sometimes it doesnt work when I shut down my PC? is it normal?or should I setup everything again?