[ϞVσΧ]

Hello Everybody,
Today I would like to show you how to set up a VPN and have a Rat Run through it. I'm going to be Explaining this in Steps.
What You'll Need:

• 
  


• a VPN (Must Allow Port Forwarding)
  


• a R.A.T. Software
  


• a Router (Optional)
  

Note: For This TuT I'm Using AirVPN
Step One ~ Opening Your VPN Ports
Open up your Port Forwarding Menu and Open Two ports. The Internal and External options Should be the same.(This is Different for every VPN but the concept is the same)


Step Two ~ Opening Your Router Ports
NOTE**:If you do not have router please skip this step! Okay for This Step you need to open CMD, And A Web Browser. On your Command Prompt (CMD) type "ipconfig" and you should get a screen like this.

Please Scroll tell you see "Default Gateway" and get the Local Network Code(Its Usually "192.168.1.1"). Then Please type that in your web browser URL bar. After you hit enter a text box with username and password will appear if you know the user & password please input now. if not try this.(Note Username is blank)
Username:
Password: admin
Now Depending on Your Router you'll get to a screen that looks like this.

Click Me

Please direct your self to the Gaming or Port Section. Then you Should see something that looks like this.


Now Please look back and get the ports that you set up on the VPN and Insert Them into the Internal and External Slots. then Set the protocol to UDP/TCP or Both. After That's all set up the slots next to it Look like this.

Now if you know How to get this info Skip this part and go Down to Step Three. If You Don't, Open that CMD you had before and look for IPv4 and Grab the address and insert that last numbers into the Slot.


Please Go to http://www.canyouseeme.org/. NOTE This Site is Not always accurate.

Step Three ~ Setting up your RAT
in this Step You need to Decide if your going to use a DNS Service.(like NO-IP)
Now I'm not going into Detail about how to set up your RAT because it is different depending on Variables(like what rat,DNS Service, and other things). although I will tell you what to put into the ports For the main Port I recommend using the First Port You opened (Personal Opinion). Then if your Rat Requires two ports insert the next port you opened.

Now Test!!

Note*: feel Free to message me about this ;)

[₦etwork ₪ Stresser]

Ill give it a try , and post my Feedback

[ϞVσΧ]

Alright hope my TuT helps. I'm here to help if you need anything!

[2k13]

Thanks for the great Tutorial! :) Its helped me.

[ϞVσΧ]

Thanks for the great Tutorial! :) Its helped me.

Your Welcome Thanks for the post If you need help PM me