[Powder]

How to setup the Babylon RAT

Introduction

Today I want to show you how to setup the Babylon Remote Administration Tool (Babylon RAT) with a DNS and without one.
For this Tutorial I'm using the newest version of Babylon (1.4.1).
If you don't know, if you have the newest version check the right corner of the GUI.

Which you can see here:
Spoiler (Click to View)



Preparation

DNS Part
Now you need to decide, if you want to use a DNS or not.
I would recommend a DNS, because it's safer than without one!
If you don't want to use it, you can skip this part. I wouldn't recommend using No-Ip, because it isn't safe anymore.
I can recommend FreeDNS and DuckDNS.
I will show you how to set up a DNS at FreeDNS.

First of all we need to create a Account which can be done here.
After you signed up you can start creating your subdomain. Just click on "Subdomains" or follow this link. Then you need to click on "Add a subdomain". Now you can create your subdomain.

Here are my settings:

Spoiler (Click to View)



Explanation:
Subdomain: You need to enter a name for your subdomain.
Domain: Choose a domain for your subdomain.
Destination: Here you need to put the IP you want to use "behind" this DNS (subdomain/domain).

VPN Part
At the VPN part you need to decide (again) if you want to use a VPN behind your DNS or not. If not, you can skip this part. I can recommend to use a VPN, because it "hides" your real IP. I can recommend 143VPN, because it has no logs and fast servers. If you want a more cheap VPN you can buy RA4W VPN, BUT I heard that they are/were unstable.

Main Part (Setting it up finally!)

Step 1: First of all turn off your Anti Virus and the firewall.
Step 2: Start the Babylon RAT.
Step 3: Add a port. You can add a port by clicking File, then Settings. You can find "File" in the top left corner of the GUI.
Step 4: Build a server. Remember to put the same key as the port key.
Step 5: Test it. If you want to close it easy, just uncheck "Hidden" and it will show a message in the right corner on the bottom.

Spoiler (Click to View)

Here is a screenshot of my settings:
Spoiler (Click to View)

Now you can test it. If you want to close it easy, just uncheck "Hidden" and it will show a message in the right corner on the bottom.

Explanation of the Builder tabs

Installation tab: Screenshot
Here you can choose if you want that Babylon should be installed on this system or not. It is used for auto start up on a system reboot too.

Process tab: Screenshot
Critical Process:
If the process is killed outside of Babylon it will cause a system wide crash.
Respawn Process:
If the process is killed outside of Babylon it will reestablish itself.
Instance Control:
Ensure there is only one instance of the client running running on the remote PC.
Other: Screenshot
Keylogger: Monitor your clients keystrokes both online and offline or watch your clients keystrokes as it types.

Links:

143VPN
RA4W VPN
Babylon RAT

Contact:

Contact me if you need help setting up your RAT, don't forget to port forward!
Contact Gyo' too, if you find any bugs.
PM Powder
PM Gyo'
PM Business

NOTE: I'm not responsible for anything I showed in this tutorial.

Changelog:

Code

Changelog:

Date 05/12/2015
[FIX ] Installer has been fixed.
[GUI ] A status bar has been added to the Password Recovery.
[GUI ] Added tooltips to the builder instead of text, "unnecessary clutter". Just hover over a particular feature and it will tell what it does.

Date 05/11/2015
[FUNC] Password recovery is remade, supports now Chrome, Firefox, IE, Opera and Safari.
[FIX ] Remote Desktop has been optimized.
[GUI ] Start and stop button has been merged together in the Live Keylogger.

Date 04/15/2015
[FUNC] Idle status added.
[FUNC] Uptime status added.
[FIX ] On some PC's it kept spamming "A Babylon RAT client has been accepted and decrypted", this has now been fixed.

Date 04/12/2015
[FIX ] Password Recovery now fully automated - do not support "Send to All".
[FIX ] Taking screenshots is now fixed.
[FIX ] Remote Desktop should no longer cause random crashes.
[FUNC] Keylog option now added to the builder.

Date 04/08/2015
[FIX ] Save option in the builder is now working properly.

Date 04/07/2015
[FIX ] Fixed parts of the remote desktop, still not complete as I still experience some issues but its rarely.
[FIX ] Fixed Update function for mass sending.
[FIX ] Optimized remote file explorer, still gonna make some further adjustments.
[FUNC] Added password recovery for chrome and mozilla firefox.
[FUNC] Added new password recovery tab, gather all recovered passwords with the ability to copy, clear and save all into a txt file.
[GUI ] Adjusted the GUI for the builder, settings->networking & settings->Misc.Had a scaling issue on my laptop.
[FUNC] Added offline/online keylogger, enable/disable, check logs or delete current logs. Logs are stored on client side.

Date 02/24/2015
[FUNC] Monitor your clients keystrokes (UNICODE) from an inbuilt user interface. Start, Stop monitoring or save the current session in a .txt file and with the ability to monitor multiple clients at once.
[FIX ] Minor fix in the Uninstallation feature.
[GUI ] Minor GUI adjustment for the Chat box.

Date 01/29/2015
[FIX ] The option Installation when building a client is now working properly (used for auto startup).

Date 01/22/2015
[FUNC] Added FPS to the remote desktop. You're now able to see the FPS while streaming.
[FIX ] Minor bug for the creation of reverse proxies (Enable Authorization will now allow the textfield for username and password to accept inputs).
[DEL ] Miner has been removed but will be re-added on a later moment with an update.

NOTE: I'm not responsible for anything I showed in this tutorial.

[⁠Cammy]

I see you have put quite an amount of effort into this tutorial. Good work!

[Powder]

Yeah it took some time, me and Gyo' invest. Thanks, I hope it helped you.
🤝

[Powder]

Great tutorial Jennis. I will embed this into my sales thread. Im sorry for not having noticed this until now.

No problem. I'm happy it looks good to you. Thanks for putting it in your thread!

[mrfong]

Looks like a great tutorial , and you did put some effort into it, thanks for this

[Powder]

Looks like a great tutorial , and you did put some effort into it, thanks for this

No problem. I hope this will help a lot of people.

[snidex]

Thanks for this TUT Sir. Everything works pretty well.

[Business]

Great tutorial! If anyone needs any help I am now part of the Babylon staff.

[Culperring722]

Thanks for the tut man was helpful for me

[Powder]

Thanks for this TUT Sir. Everything works pretty well.

Thanks, nice to hear that. Let me know if you need help.

Great tutorial! If anyone needs any help I am now part of the Babylon staff.

Thanks. I will put your details in the contact section. Could you pm me the private message link to your profile ?

Thanks for the tut man was helpful for me

No problem. Great to hear that!

[Business]

If anyone needs any help, we are here most of the day to assist any customers.

[Powder]

EDIT: Added Business to the "Contact" list.

[jasalyi]

thanks for the tut, was away for too long so this helped me alot

[Powder]

thanks for the tut, was away for too long so this helped me alot

No problem. Great to hear that.
🤝

[OfficialNutty]

Do we have to download a client or anything for freedns? I set up everything and tested on myself and it works fine. But on the freedns site, when I click on "direct url" next to my domain, it shows me my real IP. Is it suppose to do that?