Home Upgrade Search Memberlist Extras Hacker Tools Award Goals Help Wiki Contact

Got ratted from a hack pack and it keeps reinstalling

So i downloaded a hack pack off the site and i was just going through the programs to see what each one does since im new here, and then i noticed when i opened task manager it showed a running app called "Internet Explorer (32bit)" but the icon was some lightning thing and when i click on it and made a little drop down that showed Form1 lol :D, so then i got curious and ran dark comet rat remover and DC Keylogger and Winwork.exe keep poping up and wont get removed..
Please read through the points below to ensure this process moves as quickly and efficiently as possible.
  • Ensure you read through my instructions thoroughly, and carry out each step in the order specified.

  • Please do not run any tools or take any steps other than those I provide for you. Independent efforts may make matters worse, and will affect my ability in providing the best set of instructions for you.

  • Please backup important files before proceeding with my instructions. Malware removal can be unpredictable at times.

  • If you come across any issues whilst following my instructions, please stop and inform me of the issue in as much detail as possible. Please do not hesitate to ask before proceeding.

  • I will notify you when I believe your computer is free of malware. Please bear in mind, absence of symptoms does not necessarily correlate to absence of malware, so please wait until the "All Clean".


------
Step 1: Farbar Recovery Scan Tool (FRST) Scan
  • Please download Farbar Recovery Scan Tool (x32) or Farbar Recovery Scan Tool (x64) and save the file to your Desktop.

  • Note: Download and run the version compatible with your system (32 or 64-bit). Download both if you're unsure; only one will run.

  • Right-Click FRST.exe or FRST64.exe and select Run as Administrator

  • Click Yes to the disclaimer.

  • Ensure the Addition.txt box is checked.

  • Click the Scan button and let the program run.

  • Upon completion, click OK, then OK on the Addition.txt pop up screen.

  • Two logs (FRST.txt & Addition.txt) will now be open on your Desktop. Copy the contents of both logs and paste them to pastebin.com. Post the link here.


Step 2: RogueKiller
  • Download RogueKiller (32 bit)/RogueKiller (64 bit) and save the file to your Desktop.

  • Note: Download and run the version compatible with your system (32 or 64-bit). Download the first (32-bit) if you're unsure.

  • Close any running programs.

  • Right-Click RogueKiller.exe and select Run as administrator to run the program.

  • Allow the Prescan to complete. Upon completion, a window will open. Click Accept.

  • A browser window may open. Close the browser window.

  • Click [Image: jpgUwzp.png]. Upon completion, click [Image: phPvmc6.png].

  • Close the program. Do not fix anything!

  • A log (RKreport.txt) will be open. Copy the contents of the log to pastebin.com, click Submit and paste the link to it in your next reply.


Addition: pastebin.com/wMJJBUa3
FRST: pastebin.com/wU3QHks1


(May 9, 2015 08:41 AM)Knautschtabak Wrote:  Please read through the points below to ensure this process moves as quickly and efficiently as possible.
Posted above, thank you for trying to help


(May 9, 2015 02:14 PM)lukasv456 Wrote:  Addition: pastebin.com/wMJJBUa3
FRST: pastebin.com/wU3QHks1


Posted above, thank you for trying to help

Roguekiller: pastebin.com/zxheHs2d
Yes, you have a RAT.
Question: Do you use Darkcomet?

------
Backdoor warning: We can remove the visible infection signs, but due to the nature of this type of malware, no one can guarantee the trustworthiness of your computer. If you want to use it for anything important like online-banking, reformat and install of your operating system is the safest option.

Note: Please change any of your passwords from a non-infected computer.
------

Step 1: Roguekiller Fix

Follow the same steps you did on RogueKiller, but after the Scan is finish go through each tab to find and check the following entries.
After you have checked all the entries, click on Delete and finally Report and paste the log to http://pastebin.com/

Code
[Suspicious.Path|VT.Backdoor:Win32/Fynloski.A] WinWork.exe(5296) -- C:\Users\Lucas\AppData\Local\Temp\Path_58044\WinWork.exe[-]VT(16) -> Killed [TermProc]
[Suspicious.Path|Proc.Injected|VT.Backdoor:Win32/Fynloski.A] WinWork.exe(5740) -- C:\Users\Lucas\AppData\Local\Temp\Path_8107\WinWork.exe[-]VT(16) -> Killed [TermProc]
[Rans.Gendarm] (X64) HKEY_USERS\S-1-5-21-1223581141-2463725323-2735195162-1002\Software\Microsoft\Windows\CurrentVersion\Run | update : C:\Users\Lucas\AppData\Local\Temp\WinApp\RCE.exe [-] -> Found
[Rans.Gendarm] (X86) HKEY_USERS\S-1-5-21-1223581141-2463725323-2735195162-1002\Software\Microsoft\Windows\CurrentVersion\Run | update : C:\Users\Lucas\AppData\Local\Temp\WinApp\RCE.exe [-] -> Found
[PUM.SecurityCenter] (X86) HKEY_LOCAL_MACHINE\Software\Microsoft\Security Center | AntiVirusDisableNotify : 0  -> Found
[PUM.SecurityCenter] (X86) HKEY_LOCAL_MACHINE\Software\Microsoft\Security Center | UpdatesDisableNotify : 1  -> Found

Step 2: Farbar Recovery Scan Tool (FRST) Script
  • Press the Windows Key [Image: pdKOQKY.png] + r on your keyboard at the same time. Type Notepad and click OK.

  • Copy the entire contents of the codebox below and paste into the Notepad document.
    Code
    start
    CreateRestorePoint:
    CloseProcesses:
    C:\Users\Lucas\AppData\Local\Temp\Path_58044
    C:\Users\Lucas\AppData\Local\Temp\Path_8107
    Folder: C:\Users\Lucas\AppData\Local\Temp
    HKU\S-1-5-21-1223581141-2463725323-2735195162-1002\...\Run: [Spotify Web Helper] => [X]
    HKU\S-1-5-21-1223581141-2463725323-2735195162-1002\...\Run: [AdobeBridge] => [X]
    HKU\S-1-5-21-1223581141-2463725323-2735195162-1002\...\Run: [Xvid] => [X]
    HKU\S-1-5-21-1223581141-2463725323-2735195162-1002\...\Run: [CCleaner Monitoring] => [X]
    HKU\S-1-5-21-1223581141-2463725323-2735195162-1002\...\Run: [Spotify] => [X]
    HKU\S-1-5-21-1223581141-2463725323-2735195162-1002\...\Run: [Steam] => [X]
    HKU\S-1-5-21-1223581141-2463725323-2735195162-1002\...\Run: [update] => [X]
    HKU\S-1-5-21-1223581141-2463725323-2735195162-1002\...\Policies\system: [EnableLUA] 0
    HKU\S-1-5-21-1223581141-2463725323-2735195162-1002\...\MountPoints2: {46b497a4-b5dc-11e3-8275-d43d7eed4b4e} - "E:\Setup\rsrc\Autorun.exe"
    AppInit_DLLs-x32: ￿Ȅ噎䵒 => "￿Ȅ噎䵒" File Not Found
    S3 X6va017; \??\C:\Windows\SysWOW64\Drivers\X6va017 [X]
    S3 X6va021; \??\C:\Windows\SysWOW64\Drivers\X6va021 [X]
    S3 X6va022; \??\C:\Windows\SysWOW64\Drivers\X6va022 [X]
    S3 X6va025; \??\C:\Windows\SysWOW64\Drivers\X6va025 [X]
    S3 X6va026; \??\C:\Windows\SysWOW64\Drivers\X6va026 [X]
    S3 X6va027; \??\C:\Windows\SysWOW64\Drivers\X6va027 [X]
    S3 X6va028; \??\C:\Windows\SysWOW64\Drivers\X6va028 [X]
    R3 X6va029; \??\C:\Windows\SysWOW64\Drivers\X6va029 [X]
    C:\Users\Lucas\Downloads\ComboFix.exe
    File: C:\Users\Lucas\AppData\Local\LumaEmu
    EmptyTemp:
    end

  • Click File, Save As and type fixlist.txt as the File Name.

  • Important: The file must be saved in the same location as FRST.exe.


NOTICE: This script is intended for use on this particular machine. Do not use this script on any other machine; doing so may cause damage to your Operating System.
  • Right-Click FRST.exe and select Run as administrator to run the program.

  • Click Fix.

  • A log (Fixlog.txt) will open on your desktop. Copy the contents of the log to pastebin.com and paste the link to it in your next reply.


(May 10, 2015 12:08 PM)Knautschtabak Wrote:  [*]A log (Fixlog.txt) will open on your desktop. Copy the contents of the log to pastebin.com and paste the link to it in your next reply.
[/LIST]

fixlog: pastebin.com/ymfLsar1
Step 1: Malwarebytes Anti-Malware (MBAM)
  • Please download the Malwarebytes Anti-Malware setup file to your Desktop.

  • Open mbam-setup.x.x.xxxx.exe (x represents the version #) and follow the prompts to install the programme.

  • Open Malwarebytes Anti-Malware and click Update Now.

  • Once updated, click the Settings tab, followed by Detection and Protection and tick Scan for rootkits.

  • Click the Scan tab, ensure Threat Scan is selected and click Start Scan.

  • Note: You may see the following message, "Could not load DDA driver". Click Yes, allow your PC to reboot and continue afterwards.

  • If threats are detected, click Remove Selected. If you are prompted to reboot, click Yes.

  • Upon completion of the scan (or after the reboot), click the History tab.

  • Click Application Logs and double-click the Scan Log.

  • Click Copy to Clipboard and paste the pastebin.com link for the log in your next reply.



Step 2: FRST
Do another scan with FRST and post a fresh FRST.txt and Addition.txt
MBAM : pastebin.com/a2jpnTTN
FRST: pastebin.com/rMGxZnSN
ADDITION: pastebin.com/pKU27aFk
Quote:C:\Users\Lucas\Desktop\Tools and stuff\Tools\DarkCometRAT531

I suspect this is yours. If you need it, just get it back from MBAM quarantine.

Empty your recycle bin. It is full of infected files.

You snipped the first lines in your last FRST fix. We need to do these again.
Also there is an issue with a Unicode entry. Open the FRST.txt on your machine, copy the line that looks like this:

Code
AppInit_DLLs-x32: ￿Ȅ噎䵒 => "￿Ȅ噎䵒" File Not Found

And add this line after CloseProcesses: to the following FRST script. FRST is able to read Unicode, but I cannot really copy it properly for you.

Farbar Recovery Scan Tool (FRST) Script
  • Press the Windows Key [Image: pdKOQKY.png] + r on your keyboard at the same time. Type Notepad and click OK.

  • Copy the entire contents of the codebox below and paste into the Notepad document.
    Code
    start
    CreateRestorePoint:
    CloseProcesses:
    C:\Users\Lucas\AppData\Local\Temp\Path_58044
    C:\Users\Lucas\AppData\Local\Temp\Path_8107
    Folder: C:\Users\Lucas\AppData\Local\Qc1n6SRAyS2IKsFWMS
    Folder: C:\Users\Lucas\AppData\Local\Temp
    EmptyTemp:
    end

  • Click File, Save As and type fixlist.txt as the File Name.

  • Important: The file must be saved in the same location as FRST.exe.


NOTICE: This script is intended for use on this particular machine. Do not use this script on any other machine; doing so may cause damage to your Operating System.
  • Right-Click FRST.exe and select Run as administrator to run the program.

  • Click Fix.

  • A log (Fixlog.txt) will open on your desktop. Copy the contents of the log to pastebin.com and paste the link to it in your next reply.


(May 11, 2015 12:58 PM)Knautschtabak Wrote:  [*]A log (Fixlog.txt) will open on your desktop. Copy the contents of the log to pastebin.com and paste the link to it in your next reply.
[/LIST]

fixlog.txt: pastebin.com/s2fvzXEt
i would never recommend downloading those packs. a lot of those files are usually outdated and probably have malware of some kind.
Give me a fresh FRST.txt and Addition.txt, please.
(May 11, 2015 07:30 PM)Grim Wrote:  i would never recommend downloading those packs. a lot of those files are usually outdated and probably have malware of some kind.

Yea i learned that now :D,i just deleted all of it and am just downloading fresh new releases :P


FRST: pastebin.com/hKusu7dz
addition: pastebin.com/X9hWezKs


(May 11, 2015 07:44 PM)Knautschtabak Wrote:  Give me a fresh FRST.txt and Addition.txt, please.

Ta-da , thanks for the help
You should start reading my malware guide Here, It tells you everything about the newest malware's out there and how you protect against those threats.
Please navigate to the following folder and delete it:

C:\Users\Lucas\AppData\Local\Qc1n6SRAyS2IKsFWMS

Empty your recycle bin after that.

We got rid of the RAT, but the trovi search in your browser makes me suspicious. We will do some adware cleaning too.

Junkware Removal Tool (JRT)
  • Please download Junkware Removal Tool and save the file to your Desktop.

  • Create a System Restore Point. For instructions, please refer to the following link (W8) | link (W7) | link (Vista).

  • Temporarily disable your anti-virus software. For instructions, please refer to the following link.

  • Right-Click JRT.exe and select Run as administrator to run the program.

  • Follow the prompts and allow the scan to run uninterrupted.

  • Upon completion, a log (JRT.txt) will open on your desktop.

  • Re-enable your anti-virus software

  • Copy the contents of JRT.txt to pastebin.com and paste the link in your next reply.



AdwCleaner
  • Please download AdwCleaner and save the file to your Desktop.

  • Right-Click AdwCleaner.exe and select Run as administrator to run the program.

  • Follow the prompts.

  • Click Scan.

  • Upon completion, click Report. A log (AdwCleaner[R0].txt) will open. Briefly check the log for anything you know to be legitimate.

  • Ensure anything you know to be legitimate does not have a checkmark, and click Clean.

  • Follow the prompts and allow your computer to reboot.

  • After rebooting, a log (AdwCleaner[S0].txt) will open. Copy the contents of the log to pastebin.com and paste the links in your next reply.


-- File and folder backups are made for items removed using this tool. Should a legitimate file or folder be removed (otherwise known as a 'false-positive'), simple steps can be taken to restore the item. Please do not overly concern yourself with the contents of AdwCleaner[R0].txt.
(May 12, 2015 11:59 AM)Knautschtabak Wrote:  [*]Copy the contents of JRT.txt to pastebin.com and paste the link in your next reply.

JRT : pastebin.com/DsN7CeRX


adw : pastebin.com/JdKL2grV


Possibly Related Threads...
Thread / Author Replies Views Last Post
[Infected] by rSM-Feb 11, 2020 12:28 PM 5 240 Feb 11, 2020 12:28 PM
Last Post: Bastille
by blobberMay 27, 2019 03:11 PM 3 131 May 27, 2019 03:11 PM
Last Post: paradisiac
by Absolute GreatestFeb 18, 2016 06:19 PM 4 135 Feb 18, 2016 06:19 PM
Last Post: kenjoe1230