Have you ever wanted to manage your own VPN/logs ?
Well Here is a Little Tutorial on how to get started - requirements A VPS / With or With out DDOS Protection - DDoS Protection Recommended.
Where do I get a DDoS Protected VPS Well Most VPS providers Provided this but you can use ovh.com nfoservers.com Or Others!
Getting Started -
Next we want do run
you will see something like this http://prntscr.com/jej6l2 then press enter Keep Default Port 1194 Press Enter again
Now Select The DNS you want use i Chose 2 Google DNS http://prntscr.com/jej7cm then press Enter again now its gonna build
Once its down installing it will look like this http://prntscr.com/jej8go
Now run this command here :
If it worked you will see this http://prntscr.com/jej97e
Then Run this command here:
it will look like this http://prntscr.com/jej9ru
Last command to run :
If you want to turn off Pings or back on again run
Now if you dont have the openVPN Client Go Here : https://openvpn.net/index.php/download/c...loads.html Pick the Software compatible with your Operation system
Once that's done Transfer the Ovpn Config to the config folder in OpenVPN (usually in “C:\Program Files(x86)\OpenVPN\config\”).
Well Here is a Little Tutorial on how to get started - requirements A VPS / With or With out DDOS Protection - DDoS Protection Recommended.
Where do I get a DDoS Protected VPS Well Most VPS providers Provided this but you can use ovh.com nfoservers.com Or Others!
Getting Started -
Code
Wget the openVPN Installer : wget http://www.godz-soldiers.xyz/openvpn-install.sh; chmod +x openvpn-install.shNext we want do run
Code
./openvpn-install.shyou will see something like this http://prntscr.com/jej6l2 then press enter Keep Default Port 1194 Press Enter again
Now Select The DNS you want use i Chose 2 Google DNS http://prntscr.com/jej7cm then press Enter again now its gonna build
Once its down installing it will look like this http://prntscr.com/jej8go
Now run this command here :
Code
ps ax|grep openvpnThen Run this command here:
Code
sysctl -p /etc/sysctl.confLast command to run :
Code
iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADEIf you want to turn off Pings or back on again run
Code
## turn off
sysctl net.ipv4.icmp_echo_ignore_all=1
## turn back on
sysctl net.ipv4.icmp_echo_ignore_all=0
An save sysctl -pNow if you dont have the openVPN Client Go Here : https://openvpn.net/index.php/download/c...loads.html Pick the Software compatible with your Operation system
Once that's done Transfer the Ovpn Config to the config folder in OpenVPN (usually in “C:\Program Files(x86)\OpenVPN\config\”).

