[KidDomo]

Make sure you are using your no-ip dns instead of your local host (127.0.0.1) when building your server. Make sure you have DUC no-ip updater open aswell.
You cant tell if your server if working or not by just testing on another person. There could be many things which would make it not work...such a AVs detecting it, especially if it not crypted.

The problem there is that the port you are listening is already in use. You must be listening to the port on another program, or even Darkcomet itself. If you are sure you are not already listening to the port, restart your computer and that should fix your problem.

So i checked out the ip (127.0) and it was my own dns. so when tried saving the stub this happens

Yet i am the admin. So i decided to save it into a flash drive. No where else works. When i ran the stub with an antivirus in sandboxie it also works. so i tried sending it to another computer but it did not work. and my duc is on with three checks

[xVulnerable]

So i checked out the ip (127.0) and it was my own dns. so when tried saving the stub this happens

Yet i am the admin. So i decided to save it into a flash drive. No where else works. When i ran the stub with an antivirus in sandboxie it also works. so i tried sending it to another computer but it did not work. and my duc is on with three checks

Try running Darkcomet as Admin.
And by "sending to another computer" What do you mean exactly?
Are you sure the user ran the file? And does the computer have all AVs switched off?

[wubulaien]

Hi .Anon, nice thread. Thanks for that.

I have a question:
i exploited a computer by MSF and uploaded my stub to the enemy. I see the server is running in the processes. But i do not get connected to it.
It's the same server i spreaded a few times and everybody can be seen. Only this computer makes me headaches.
Prot forward is correct, no-ip is correct.
You somewhere said remove mutex. what do you mean? only clean the line Process Mutex?

thanks for your help

[xVulnerable]

Apart from the possibility of being blocked by some firewall or AV, it could be possible that the slave is not appearing due to your RAT being unstable. Viruses will never have a 100% execution rate.
This means, if say 100 people run my server on their computer, i will probably get 90 ish servers, and those other 10 are lost.

Mutex is used so only one server could be ran on the a computer at the same time.
So try creating another server, make sure it has a different mutex or simply do not add it, and re run the server on the computer and see if it works.

If that does't work, there's nothing you can really do, viruses simply cannot have a 100% execution rate.

[KidDomo]

Try running Darkcomet as Admin.
And by "sending to another computer" What do you mean exactly?
Are you sure the user ran the file? And does the computer have all AVs switched off?

Oh heyyy :d well the admin works love you <3
But now the issue is that when they
double click it. and i know this because i went on my friends computer and double clicked it myself. and i turned off their av :P
Unless i need to get a crypter o.o if i do can u recommend me a good long life time one :D

[xVulnerable]

Oh heyyy :d well the admin works love you <3
But now the issue is that when they
double click it. and i know this because i went on my friends computer and double clicked it myself. and i turned off their av :P
Unless i need to get a crypter o.o if i do can u recommend me a good long life time one :D

Tinymanipulator is a nice crypter, check out their thread.
https://hackforums.net/showthread.php?tid=3378186

[KidDomo]

Tinymanipulator is a nice crypter, check out their thread.
https://hackforums.net/showthread.php?tid=3378186

so the reason why i coulodnt rat them is because i didnt have a crypt?

[xVulnerable]

Most probably, a crypter is necessary anyways if you're going to try to infect other users.

[Oghma]

Hi, i am using DC 5.1 rat. When i create a server on minimal version,what do i have to choose for dest path?its default on mydocuments do i have to use put it on start?maybe thats the reason why i lost 15slaves(all of my slaves in 2days..?)

[xVulnerable]

Hi, i am using DC 5.1 rat. When i create a server on minimal version,what do i have to choose for dest path?its default on mydocuments do i have to use put it on start?maybe thats the reason why i lost 15slaves(all of my slaves in 2days..?)

It doesn't matter where you set the destination path.
The destination path is just where the file is installed one ran.
Normally viruses are set to be installed to Temp folder or Appdata as these folders are hidden.
This has nothing to do with loosing any slaves.
Make sure you add startup by clicking "start the stub with windows".

[Hypnotic]

Request: Install
Skype: xhypnotiiko
Have TV?: Yes
RAT Client: DC

[LolBeer]

Which one of the three you support would you recommend going for? Without taking into consideration the price?

Thanks!

I Will be using paid crypter.

[xVulnerable]

Which one of the three you support would you recommend going for? Without taking into consideration the price?

Thanks!

I Will be using paid crypter.

Who am i to know what is it that you need most?

[Sinq]

Request: [Setup/Install] Both
Skype: [Skype name] None
Have TV?: [Yes/No] Yes
RAT Client: [BS/DC/IM] Any

[xVulnerable]

Guys if you want a RAT setup, at least be bothered to download the RAT you want me to setup for you.