----------------------------------------------------------------------------
(4) WDC WD7500AAKS-00RBA0
----------------------------------------------------------------------------
Model : WDC WD7500AAKS-00RBA0
Firmware : 30.04G30
Serial Number : WD-WCAPT0396128
Disk Size : 750.1 GB (8.4/137.4/750.1/----)
Buffer Size : 16384 KB
Queue Depth : 32
# of Sectors : 1465149168
Rotation Rate : Unknown
Interface : Serial ATA
Major Version : ATA/ATAPI-7
Minor Version : ----
Transfer Mode : SATA/300
Power On Hours : 20857 hours
Power On Count : 3488 count
Temparature : 37 C (98 F)
Health Status : Caution
Features : S.M.A.R.T., AAM, 48bit LBA, NCQ
APM Level : ----
AAM Level : 80FEh [ON]
-- S.M.A.R.T. --------------------------------------------------------------
ID Cur Wor Thr RawValues(6) Attribute Name
01 200 200 _51 000000000053 Read Error Rate
03 187 182 _21 000000001DC0 Spin-Up Time
04 _93 _93 __0 000000001D70 Start/Stop Count
05 200 200 140 000000000000 Reallocated Sectors Count
07 100 253 _51 000000000000 Seek Error Rate
09 _72 _72 __0 000000005179 Power-On Hours
0A 100 100 _51 000000000000 Spin Retry Count
0B 100 100 _51 000000000000 Recalibration Retries
0C _97 _97 __0 000000000DA0 Power Cycle Count
C0 200 200 __0 000000000274 Power-off Retract Count
C1 198 198 __0 000000001D92 Load/Unload Cycle Count
C2 115 _94 __0 000000000025 Temperature
C4 200 200 __0 000000000000 Reallocation Event Count
C5 199 199 __0 0000000000D0 Current Pending Sector Count
C6 200 199 __0 000000000004 Uncorrectable Sector Count
C7 200 200 __0 00000001525F UltraDMA CRC Error Count
C8 197 175 _51 0000000000E7 Write Error Rate
And under the "Current Pending Sector Count" and "Uncorrectable Sector Count" its listed as yellow and my hard drive's status is "Caution" because of this.
Should I be worried about this and is there anyway to fix this?
Any help would be appreciated.
(4) WDC WD7500AAKS-00RBA0
----------------------------------------------------------------------------
Model : WDC WD7500AAKS-00RBA0
Firmware : 30.04G30
Serial Number : WD-WCAPT0396128
Disk Size : 750.1 GB (8.4/137.4/750.1/----)
Buffer Size : 16384 KB
Queue Depth : 32
# of Sectors : 1465149168
Rotation Rate : Unknown
Interface : Serial ATA
Major Version : ATA/ATAPI-7
Minor Version : ----
Transfer Mode : SATA/300
Power On Hours : 20857 hours
Power On Count : 3488 count
Temparature : 37 C (98 F)
Health Status : Caution
Features : S.M.A.R.T., AAM, 48bit LBA, NCQ
APM Level : ----
AAM Level : 80FEh [ON]
-- S.M.A.R.T. --------------------------------------------------------------
ID Cur Wor Thr RawValues(6) Attribute Name
01 200 200 _51 000000000053 Read Error Rate
03 187 182 _21 000000001DC0 Spin-Up Time
04 _93 _93 __0 000000001D70 Start/Stop Count
05 200 200 140 000000000000 Reallocated Sectors Count
07 100 253 _51 000000000000 Seek Error Rate
09 _72 _72 __0 000000005179 Power-On Hours
0A 100 100 _51 000000000000 Spin Retry Count
0B 100 100 _51 000000000000 Recalibration Retries
0C _97 _97 __0 000000000DA0 Power Cycle Count
C0 200 200 __0 000000000274 Power-off Retract Count
C1 198 198 __0 000000001D92 Load/Unload Cycle Count
C2 115 _94 __0 000000000025 Temperature
C4 200 200 __0 000000000000 Reallocation Event Count
C5 199 199 __0 0000000000D0 Current Pending Sector Count
C6 200 199 __0 000000000004 Uncorrectable Sector Count
C7 200 200 __0 00000001525F UltraDMA CRC Error Count
C8 197 175 _51 0000000000E7 Write Error Rate
And under the "Current Pending Sector Count" and "Uncorrectable Sector Count" its listed as yellow and my hard drive's status is "Caution" because of this.
Should I be worried about this and is there anyway to fix this?
Any help would be appreciated.


![[Image: SY7Xhmu.png]](https://i.imgur.com/SY7Xhmu.png)